Bruksanvisning Makita 5740NB Cirkelsåg

Bruksanvisning

3

enables better control of the tool in unexpected situ-

ations.

14. Use safety equipment. Always wear eye protec-

tion. Dust mask, non-skid safety shoes, hard hat, or

hearing protection must be used for appropriate con-

ditions. Ordinary eye or sun glasses are NOT eye

protection.

Tool Use and Care

15. Use clamps or other practical way to secure and

support the workpiece to a stable platform. Hold-

ing the work by hand or against your body is unsta-

ble and may lead to loss of control.

16. Do not force tool. Use the correct tool for your

application. The correct tool will do the job better

and safer at the rate for which it is designed.

17. Do not use tool if switch does not turn it on or

off. Any tool that cannot be controlled with the

switch is dangerous and must be repaired.

18. Disconnect the plug from the power source

before making any adjustments, changing

accessories, or storing the tool. Such preventive

safety measures reduce the risk of starting the tool

accidentally.

19. Store idle tools out of reach of children and

other untrained persons. Tools are dangerous in

the hands of untrained users.

20. Maintain tools with care. Keep cutting tools

sharp and clean. Properly maintained tools with

sharp cutting edges are less likely to bind and are

easier to control.

21. Check for misalignment or binding of moving

parts, breakage of parts, and any other condition

that may affect the tools operation. If damaged,

have the tool serviced before using. Many acci-

dents are caused by poorly maintained tools.

22. Use only accessories that are recommended by

the manufacturer for your model. Accessories

that may be suitable for one tool, may become haz-

ardous when used on another tool.

SERVICE

23. Tool service must be performed only by qualified

repair personnel. Service or maintenance per-

formed by unqualified personnel could result in a risk

of injury.

24. When servicing a tool, use only identical

replacement parts. Follow instructions in the

Maintenance section of this manual. Use of unau-

thorized parts or failure to follow Maintenance

instructions may create a risk of electric shock or

injury.

USE PROPER EXTENSION CORD: Make sure your

extension cord is in good condition. When using an

extension cord, be sure to use one heavy enough to

carry the current your product will draw. An undersized

cord will cause a drop in line voltage resulting in loss of

power and overheating. Table 1 shows the correct size to

use depending on cord length and nameplate ampere

rating. If in doubt, use the next heavier gage. The smaller

the gage number, the heavier the cord.

SPECIFIC SAFETY RULES

USB008-5

DO NOT let comfort or familiarity with

product (gained from repeated use)

replace strict adherence to circular saw

safety rules. If you use this tool unsafely

or incorrectly, you can suffer serious per-

sonal injury.

1. DANGER! Keep hands away from cutting area

and blade. Keep your second hand on auxiliary

handle, or motor housing. If both hands are hold-

ing the saw, they cannot be cut by the blade.

Keep your body positioned to either side of the

saw blade, but not in line with the saw blade.

KICKBACK could cause the saw to jump backwards.

(See “Causes and Operator Prevention of Kick-

back”)

Do not reach underneath the work. The guard can

not protect you from the blade below the work. Do

not attempt to remove cut material when blade is

moving.

CAUTION: Blades coast after turn off. Wait until

blade stops before grasping cut material.

Table 1. Minimum gage for cord

Ampere Rating

Volts Total length of cord in feet

120 V 25 ft. 50 ft. 100 ft. 150 ft.

More Than Not More Than AWG

0 6 18 16 16 14

6 10 18161412

10 12 16 16 14 12

12 16 14 12 Not Recommended

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita 5740NB Cirkelsåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita 5740NB Cirkelsåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Cirkelsågar
Fler bruksanvisningar för Cirkelsågar

Vanliga frågor om Makita 5740NB Cirkelsåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita LS1040FS Cirkelsåg

Bruksanvisning

Makita N5900B Cirkelsåg

Bruksanvisning

Makita 5094D Cirkelsåg

Bruksanvisning

Makita BLS820 Cirkelsåg

Bruksanvisning

Makita 4100NH Cirkelsåg

Bruksanvisning

Makita 5007MGA Cirkelsåg

Bruksanvisning

Makita 4112HS Cirkelsåg

Bruksanvisning

Makita DHS630ZJ Cirkelsåg

Relaterade kategorier