Bruksanvisning Makita 5094D Cirkelsåg

Bruksanvisning

3

13. Do not force tool. Use the correct tool for your

application. The correct tool will do the job better

and safer at the rate for which it is designed.

14. Do not use tool if switch does not turn it on or

off. A tool that cannot be controlled with the switch is

dangerous and must be repaired.

15. Disconnect battery pack from tool or place the

switch in the locked or off position before mak-

ing any adjustments, changing accessories, or

storing the tool. Such preventive safety measures

reduce the risk of starting the tool accidentally.

16. Store idle tools out of reach of children and

other untrained persons. Tools are dangerous in

the hands of untrained users.

17. When battery pack is not in use, keep it away

from other metal objects like: paper clips, coins,

keys, nails, screws, or other small metal objects

that can make a connection from one terminal to

another. Shorting the battery terminals together

may cause sparks, burns, or a fire.

18. Maintain tools with care. Keep cutting tools

sharp and clean. Properly maintained tools with

sharp cutting edge are less likely to bind and are

easier to control.

19. Check for misalignment or binding of moving

parts, breakage of parts, and any other condition

that may affect the tool’s operation. If damaged,

have the tool serviced before using. Many acci-

dents are caused by poorly maintained tools.

20. Use only accessories that are recommended by

the manufacturer for your model. Accessories

that may be suitable for one tool may create a risk of

injury when used on another tool.

SERVICE

21. Tool service must be performed only by qualified

repair personnel. Service or maintenance per-

formed by unqualified personnel may result in a risk

of injury.

22. When servicing a tool, use only identical

replacement parts. Follow instructions in the

Maintenance section of this manual. Use of unau-

thorized parts or failure to follow Maintenance

instructions may create a risk of shock or injury.

SPECIFIC SAFETY RULES

USB068-2

DO NOT let comfort or familiarity with

product (gained from repeated use)

replace strict adherence to circular saw

safety rules. If you use this tool unsafely

or incorrectly, you can suffer serious per-

sonal injury.

1. DANGER! Keep hands away from cutting area

and blade. Keep your second hand on auxiliary

handle or motor housing. If both hands are holding

the saw, they cannot be cut by the blade.

Keep your body positioned to either side of the

saw blade, but not in line with the saw blade.

KICKBACK could cause the saw to jump backwards.

(See “Causes and Operator Prevention of Kick-

back”)

Do not reach underneath the work. The guard can

not protect you from the blade below the work. Do

not attempt to remove cut material when blade is

moving.

CAUTION: Blades coast after turn off. Wait until

blade stops before grasping cut material.

2. Check lower guard for proper closing before

each use. Do not operate saw if lower guard

does not move freely and close instantly. Never

clamp or tie the lower guard into the open posi-

tion. If saw is accidentally dropped, lower guard may

be bent. Raise the lower guard with the Retracting

Lever and make sure it moves freely and does not

touch the blade or any other part, in all angles and

depths of cut.

To check lower guard, open lower guard by hand,

then release and watch guard closure. Also check to

see that Retracting Lever does not touch tool hous-

ing. Leaving blade exposed is VERY DANGEROUS

and can lead to serious personal injury.

3. Check the operation and condition of the lower

guard spring. If the guard and the spring are not

operating properly, they must be serviced before

use. Lower guard may operate sluggishly due to

damaged parts, gummy deposits, or a buildup of

debris.

4. Lower guard should be retracted manually only

for special cuts such as “Pocket Cuts” and

“Compound Cuts.” Raise lower guard by Retract-

ing Lever. As soon as blade enters the material,

lower guard must be released. For all other saw-

ing, the lower guard should operate automatically.

5. Always observe that the lower guard is covering

the blade before placing saw down on bench or

floor. An unprotected, coasting blade will cause the

saw to walk backwards, cutting whatever is in its

path. Be aware of the time it takes for the blade to

stop after switch is released.

6. NEVER hold piece being cut in your hands or

across your leg. It is important to support the work

properly to minimize body exposure, blade binding,

or loss of control.

7. Hold tool by insulated gripping surfaces when

performing an operation where the cutting tool

may contact hidden wiring. Contact with a “live”

wire will also make exposed metal parts of the tool

“live” and shock the operator.

8. When ripping always use a rip fence or straight

edge guide. This improves the accuracy of cut and

reduces the chance for blade binding.

9. Always use blades with correct size and shape

(diamond vs. round) arbor holes. Blades that do

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita 5094D Cirkelsåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita 5094D Cirkelsåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Cirkelsågar
Fler bruksanvisningar för Cirkelsågar

Vanliga frågor om Makita 5094D Cirkelsåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita BHS630ZJ Cirkelsåg

Bruksanvisning

Makita LS1016FL Cirkelsåg

Bruksanvisning

Makita LS1216FL Cirkelsåg

Bruksanvisning

Makita 5007NF Cirkelsåg

Bruksanvisning

Makita BSS610ZX Cirkelsåg

Bruksanvisning

Makita CC300D Cirkelsåg

Bruksanvisning

Makita DCS550 Cirkelsåg

Bruksanvisning

Makita LS0714L Cirkelsåg

Relaterade kategorier