Bruksanvisning Makita 4112S Cirkelsåg

Bruksanvisning

4

ENGLISH (Original instructions)

Explanation of general view

1 Wing bolt

2Base

3 Cutting depth

4 Clamping nut

5 Wheel guard

6 Switch trigger

7 Lock lever

8 Shaft lock

9 Socket wrench

10 Flange

11 Ring

12 Wheel

13 Flange

14 Hex bolt

15 Notch

16 Cutting line

17 Commutator

18 Insulating tip

19 Carbon brush

20 Dust cover

21 Screwdriver

22 Brush holder cap

23 Dust nozzle

24 Elbow joint

25 Hose

SPECIFICATIONS

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Intended use

The tool is intended for cutting tracks in concrete walls or

cutting in ferrous materials or concrete drainage chan-

nels with a diamond wheel but without using water.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB042-2

ANGLE CUTTER SAFETY WARNINGS

Safety Warnings Common for Abrasive Cutting-Off

Operations:

1. This power tool is intended to function as a cut-

off tool. Read all safety warnings, instructions,

illustrations and specifications provided with

this power tool. Failure to follow all instructions

listed below may result in electric shock, fire and/or

serious injury.

2. Operations such as grinding, wire brushing, pol-

ishing are not recommended to be performed

with this power tool. Operations for which the

power tool was not designed may create a hazard

and cause personal injury.

3. Do not use accessories which are not specifi-

cally designed and recommended by the tool

manufacturer. Just because the accessory can be

attached to your power tool, it does not assure safe

operation.

4. The rated speed of the accessory must be at

least equal to the maximum speed marked on

the power tool. Accessories running faster than

their rated speed can break and fly apart.

5. The outside diameter and the thickness of your

accessory must be within the capacity rating of

your power tool. Incorrectly sized accessories can-

not be adequately guarded or controlled.

6. The arbour size of wheels, flanges, backing pads

or any other accessory must properly fit the

spindle of the power tool. Accessories with arbour

holes that do not match the mounting hardware of

the power tool will run out of balance, vibrate exces-

sively and may cause loss of control.

7. Do not use a damaged accessory. Before each

use inspect the accessory such as abrasive

wheels for chips and cracks, backing pad for

cracks, tear or excess wear, wire brush for loose

or cracked wires. If power tool or accessory is

dropped, inspect for damage or install an undam-

aged accessory. After inspecting and installing

an accessory, position yourself and bystanders

away from the plane of the rotating accessory

and run the power tool at maximum no-load

speed for one minute.

Damaged accessories will

normally break apart during this test time.

Model 4112S 4112HS 4114S

Wheel diameter 305 mm 305 mm 355 mm

Max cutting capacity 100 mm 100 mm 125 mm

No load speed (min

–1

) 3,500 5,000 3,500

Overall length 648 mm 648 mm 675 mm

Net weight 11.4 kg 11.4 kg 12.8 kg

Safety class /II

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita 4112S Cirkelsåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita 4112S Cirkelsåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Cirkelsågar
Fler bruksanvisningar för Cirkelsågar

Vanliga frågor om Makita 4112S Cirkelsåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita 5007FA Cirkelsåg

Bruksanvisning

Makita 5703R Cirkelsåg

Bruksanvisning

Makita DCS550 Cirkelsåg

Bruksanvisning

Makita 4114S Cirkelsåg

Bruksanvisning

Makita 5007MGA Cirkelsåg

Bruksanvisning

Makita 5740NB Cirkelsåg

Bruksanvisning

Makita 5093D Cirkelsåg

Bruksanvisning

Makita BSS500RFX Cirkelsåg

Relaterade kategorier