Bruksanvisning Logik L20CHTW18 Värmefläkt

Bruksanvisning

IB-L20CHTW18-200605V3

Thank you for purchasing your new product.

We recommend that you spend some time reading this instruction manual in order that

you fully understand all the operational features it oers.

Read all the safety instructions carefully before use and keep this instruction manual for

future reference.

2kW Convector Heater

Instruction Manual

L20CHTW18

This product is only suitable for well-insulated spaces or occasional use.

Product Overview

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so

according to local regulations.

The following items are included:

• Main Unit

• Foot x 2

• Screw x 4

Assembly

Before using the heater, the feet (supplied) must be tted to the unit.

Attach the feet to the base of the heater using the screws provided (2

for each foot), taking care to ensure that they are located correctly in the

bottom ends of the heater’s side.

Heat Operation

Position the heater upright on the oor away from curtains, furniture or wall coverings before

plugging your heater into the mains socket.

• Press the Power Switch to the “750W” or “1250W” position, the indicator will illuminate

when the heating element is ON. For maximum heat output, press both Power Switch.

• Turn the Thermostat Control to the desired position. It is recommended to select the “MAX”

position to get the heater to pre-heat. It will take 5-10 minutes for the heater to fully heat up.

• When the room reaches the desired temperature, turn the Thermostat Control slowly anti-

clockwise until the indicator goes o and the thermostat “click o” sound is heard.

• After this, the heater will keep the air temperature in the room at the set temperature

by switching on and o automatically. If the room temperature falls below the desired

temperature, the heater and indicator will turn on again until the room temperature reaches

the desired temperature.

Fit the screws in the

adjacent position

• If items are missing or damaged, please contact Partmaster (UK only).

• Tel: 0344 800 3456 for assistance.

It is normal for the heater to emit some smell and fumes when it is turned on for the

rst time or when turned on after not being used for a long period of time. This smell

will disappear when the heater has been turned on for a short while.

Handle

Power Switch

Timer Control

Thermostat Control

Fan Switch

Air Outlet

Fan Operation

• To blow warm air, turn the Thermostat Control to turn on the thermostat setting and press

the Power Switch to turn on the heating elements. Then press the Fan Switch.

• To blow cool air, turn o the thermostat and heating elements, then press the Fan Switch.

Timer Operation

The heater is tted with a 24-hour timer, which has 96 segments around its

circumference. Each segment is equivalent to 15 minutes of time. You may

preset the time and duration of the 24-hour period(s) as per your preference

in any 24-hour period.

1. Set the current time by turning the Outer Ring of the Timer Control

until the Pointer points to the current time, e.g. the gure shows the

current time is 10:30 a.m.

2. Select your preferred segments, and pull them outward for heater ON

time and inward for heater OFF time.

3. Push the Slide Switch to “

” position to start the timer. The timer will

start and the Timer Control will turn automatically. The stopwatch icon

will start turning when the timer is activated. (To switch o the timer,

push the Slide Switch to “I” position.)

4. Select your preferred power and thermostat setting.

Once the timer’s Pointer reaches the heater ON time of the selected

segments, it will switch the heater on. The unit will turn o at the end of the

selected segments.

• Make sure the heater is plugged into a power socket for the

timer to work.

• When using in timer mode, due consideration should

be given to the fact that the heater may turn on whilst

unattended.

• If the Slide Switch is set at “0" position, the heater will not

work.

Timer Control

24 HOUR FULLY

Programmable Timer

Timer Control

24 HOUR FULLY

Programmable Timer

I

Timer Control

24 HOUR FULLY

Programmable Timer

I

Cleaning

Your heater should be cleaned regularly to prevent dirt and dust from building up which will

aect its performance. Ensure the air inlet and the air outlet are not blocked.

This can be done with a vacuum cleaner, using the brush attachment.

• Ensure you unplug your heater from the mains socket and wait for the heater to

cool down completely before cleaning.

• Do not use any detergents or abrasives and do not allow any water to enter the

heater.

L20CHTW18_IB_Final200605V3.indd 1-3 05/06/2020 12:26

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Logik L20CHTW18 Värmefläkt. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Logik. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Logik L20CHTW18 Värmefläkt på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Logik Värmefläktar
Fler bruksanvisningar för Värmefläktar

Vanliga frågor om Logik L20CHTW18 Värmefläkt

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Logik L20CHTW25 Värmefläkt

Bruksanvisning

Logik L20CTH11 Värmefläkt

Bruksanvisning

Logik L22TFHW25 Värmefläkt

Bruksanvisning

Logik L23DORB25 Värmefläkt

Bruksanvisning

Logik L15OFR18 Värmefläkt

Bruksanvisning

Logik L15CFS10 Värmefläkt

Bruksanvisning

Logik L20DOR25 Värmefläkt

Bruksanvisning

Logik L18PTC21E Värmefläkt

Relaterade kategorier