Bruksanvisning LG 50LN5750 LED TV

Bruksanvisning

ENGLISH

5

IMPORTANT SAFETY INSTRUCTIONS



Dot Defect

The Plasma or LCD panel is a high technology

product with resolution of two million to six million

pixels. In a very few cases, you could see fine dots

on the screen while you’re viewing the TV. Those

dots are deactivated pixels and do not affect the

performance and reliability of the TV.



Generated Sound

“Cracking” noise: A cracking noise that occurs

when watching or turning off the TV is generated by

plastic thermal contraction due to temperature and

humidity. This noise is common for products where

thermal deformation is required.

Electrical circuit humming/panel buzzing: A low level

noise is generated from a high-speed switching

circuit, which supplies a large amount of current

to operate a product. It varies depending on the

product.

This generated sound does not affect the

performance and reliability of the product.



Take care not to touch the ventilation openings.

When watching the TV for a long period, the

ventilation openings may become hot. This does

not affect the performance of the product or cause

defects in the product.



If the TV feels cold to the touch, there may be a

small “flicker” when it is turned on. This is normal,

there is nothing wrong with TV. Some minute dot

defects may be visible on the screen, appearing as

tiny red, green, or blue spots. However, they have

no adverse effect on the TV’s performance. Avoid

touching the LCD screen or holding your finger(s)

against it for long periods of time. Doing so may

produce some temporary distortion effects on the

screen.

Preventing “Image burn” or “Burn-in” on your TV

screen



If a fixed image displays on the TV screen for a long

period of time, it will be imprinted and become a

permanent disfigurement on the screen. This is

“image burn” or “burn-in” and not covered by the

warranty.



If the aspect ratio of the TV is set to 4:3 for a

long period of time, image burn may occur on the

letterboxed area of the screen.



Avoid displaying a fixed image on the TV screen for

a long period of time (2 or more hours for LCD, 1

or more hours for the Plasma TV) to prevent image

burn.

For USA and Canada

FCC NOTICE

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to radio

or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the

equipment and the receiver.

- Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference

and (2) this device must accept any interference

received, including interference that may cause

undesired operation of the device.

Any changes or modifications in construction of

this device which are not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the National

Electric Code (U.S.A.). The code provides guidelines

for proper grounding and, in particular, specifies

that the cable ground shall be connected to the

grounding system of the building, as close to the

point of the cable entry as practical.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din LG 50LN5750 LED TV. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar LG. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din LG 50LN5750 LED TV på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för LG LED TV
Fler bruksanvisningar för LED TV

Vanliga frågor om LG 50LN5750 LED TV

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

LG 55QNED70A6A LED TV

Bruksanvisning

LG 86UA74006LB LED TV

Bruksanvisning

LG 55QNED81A6A LED TV

Bruksanvisning

LG 47LY540S LED TV

Bruksanvisning

LG 75NANO966PA LED TV

Bruksanvisning

LG 32LP360H LED TV

Bruksanvisning

LG 75UQ81006LB LED TV

Bruksanvisning

LG 75NANO916NA LED TV

Relaterade kategorier