Bruksanvisning Kodak Ngenuity 9090DC Skanner

Behöver du en bruksanvisning för din Kodak Ngenuity 9090DC Skanner? Nedan kan du se och ladda ner PDF-bruksanvisningen gratis på svenska. Den här produkten har för närvarande 1 vanliga frågor, 0 kommentarer och har 0 röster. Om det här inte är bruksanvisningen du vill ha, vänligen kontakta oss.

Är produkten defekt och erbjuder bruksanvisningen ingen lösning? Gå till ett Repair Café för gratis reparationstjänster.

Bruksanvisning

Loading…

Safety
User Precautions
Place the scanner on a sturdy, level work surface capable of supporting 50.8 kg (112 lbs) and leave adequate clearance on
all sides of the scanner.
When relocating the scanner, it is recommended that two people lift the scanner and use safe lifting techniques.
Do not install the scanner in a location subject to dust, humidity or steam. This may cause electrical shock or a fire. Only use
the scanner indoors in a dry location.
Make sure the electrical power outlet is located within 1.52 meters (5 feet) of the scanner and is easily accessible.
When disconnecting equipment from the electric socket, be sure to grasp the plug, not the cord.
Be sure the power cord is securely plugged into the wall outlet. Failure to do so may cause electrical shock or fire.
Do not damage, knot, cut or modify the power cord or use a damaged power cord. This may cause electrical shock or fire.
The scanner requires a dedicated and properly grounded power outlet. Do not use an extension cord or power strip with the
scanner.
Do not leave the power cord plugged into the AC outlet if the scanner is not used for an extended period of time.
Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.
Do not use the scanner if it becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.
Immediately stop the scanner and disconnect the power cord from the power outlet. Contact Kodak Service.
Do not disassemble, service or modify the scanner except as explained in the User’s Guide.
Do not move the scanner with the power cord and interface cable attached. This may cause damage to the cord/cable.
Remove the power cord from the wall outlet before moving or relocating the scanner.
Follow the Kodak recommended cleaning procedures. Do not use air, liquid or gas spray cleaners. These cleaners displace
dust, dirt and debris to other locations within the scanner, which may cause the scanner to malfunction.
Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds.
When accessing the MSDSs from the website, you will be required to provide the catalog number or keyword of the
consumable you want the Material Safety Data Sheet for. See the section entitled, “Supplies and consumables” later in this
guide for supplies and catalog numbers.
Users and their employers need to observe the common sense precautions applicable to the operation of any machinery. These
include, but are not limited to, the following:
Do not wear loose clothing, unbuttoned sleeves, neckties, etc.
Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.
Hair length should be kept short, using a hair net if needed, or tying long hair up in a bundle.
Remove all other loose objects from the area that could be drawn into the machine.
Take sufficient breaks to maintain mental alertness.
Use only the recommended cleaning supplies.
Do not use canned/compressed air.
Supervisors should review their employee practices and make compliance with these precautions a part of the job description
for operation of the scanner or any mechanical device.
Ladda ner bruksanvisning i Engelska (PDF, 1.73 MB)
(Tänk på miljön och skriv endast ut denna bruksanvisning om det verkligen är nödvändigt)

Loading…

Betyg

Berätta vad du tycker om Kodak Ngenuity 9090DC Skanner genom att betygsätta den. Vill du dela med dig av dina åsikter om denna produkt eller ställa en fråga? Lämna en kommentar nederst på sidan.
Är du nöjd med Kodak Ngenuity 9090DC Skanner?
Ja Nej
Bli den första personen som betygsätter denna produkt
0 röster

Delta i konversationen om denna produkt

Här kan du dela vad du tycker om Kodak Ngenuity 9090DC Skanner. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Kodak Ngenuity 9090DC Skanner. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Kodak. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Kodak Ngenuity 9090DC Skanner på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Märke Kodak
Modell Ngenuity 9090DC
Kategori Skannrar
Filtyp PDF
Filstorlek 1.73 MB

Alla bruksanvisningar för Kodak Skannrar
Fler bruksanvisningar för Skannrar

Vanliga frågor om Kodak Ngenuity 9090DC Skanner

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Vad står DPI för? Verifierad

DPI står för prickar per tum och anger hur skarpa utskrifterna kommer att vara. Fler DPI resulterar i skarpare utskrifter.

Detta hjälpte (24) Läs mer
Bruksanvisning Kodak Ngenuity 9090DC Skanner

Relaterade produkter

Relaterade kategorier

×
Download