Bruksanvisning Kenwood CO606 Konservöppnare

Bruksanvisning

b

efore plugging in

l

Make sure your electricity supply is

t

he same as the one shown on the

u

nderside of your can opener.

l

This appliance conforms to EC

R

egulation 1935/2004 on materials

a

nd articles intended to come into

contact with food.

Your Kenwood Can Opener can be

used to open a variety of domestic can

shapes and sizes. In addition the

CO606 incorporates a bottle opener

and a knife sharpening facility.

key

 bottle opener

 drive wheel

 magnet

 lever

 cutter blade

 guide pin

 knife sharpener

 cord stowage

using your table top can

opener

1 Ensure that the lever is in position

with the magnet housing fully

located  & .

2 Plug the appliance into the power

supply.

3 Lift the lever to the open position.

4 Hold the can with the top rim resting

under the metal guide pin and the

can resting on the drive wheel .

5 Press the lever lightly down to start

the motor. The self-starting blade will

then pierce the can and commence

cutting.

6 The can will be held fixed in position

with the magnet resting against the

lid. Large or wide cans may require

extra support from the user.

7 Once the can is open, the motor will

automatically stop, retaining the can

and lid safely in place.

8 To remove, lift the lever whilst

holding the can.

9 With the exception of aluminium

cans, the lid will be retained by the

magnet.

1

0 For tidiness, any unwanted length of

cord can be stowed inside the

a

ppliance.

using the bottle opener

W

hen opening tall bottles, the unit

s

hould be used towards the edge of

a work top.

1 Position the bottle with the cap

under the front rim of the bottle

opener .

2 Push down the bottle to remove the

cap whilst steadying the unit with

one hand.

using the knife

sharpener

1 With the can opener sideways on,

place the knife into one of the

recesses.

2 Press the lever down and gradually

draw it towards yourself . Then

place the knife in the other recess

and repeat. Take care not to allow

the knife to cut into the body of the

can opener.

3 Repeat this cycle several times in

order to sharpen the knife

satisfactorily.

4 The grinding wheel may jam if too

much pressure is applied on the

knife. Lift the knife slightly to release

the wheel.

NOTE: Knives without a serrated

edge, preferably carbon steel are

most suitable for sharpening.

care and cleaning

1 Disconnect the appliance by

switching off and removing the plug

from the power supply.

2 Lift the lever fully and withdraw the

assembly from the can opener .

3 Wash the lever in hot sudsy water

and dry thoroughly. Dishwashing is

not advised.

4 Replace the lever in the body

5 Wipe over the body with a damp

cloth and dry thoroughly.

3

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Kenwood CO606 Konservöppnare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Kenwood. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Kenwood CO606 Konservöppnare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Kenwood Konservöppnare
Fler bruksanvisningar för Konservöppnare

Relaterade produkter

Bruksanvisning

Kenwood CAP70 Konservöppnare

Bruksanvisning

Kenwood CO600 Konservöppnare

Bruksanvisning

Windmere CO-9510D Konservöppnare

Bruksanvisning

Windmere WCO200C Konservöppnare

Bruksanvisning

Black and Decker EC20 Konservöppnare

Bruksanvisning

Cookworks CO2061-V Konservöppnare

Bruksanvisning

Black and Decker EC1200 Konservöppnare

Bruksanvisning

Sunbeam CA2800 Konservöppnare

Relaterade kategorier