Bruksanvisning Imarflex IB-635G Blender

Bruksanvisning

REMINDER: Please do not forget to register your product warranty

through the warranty registration website at https://imarflex.ph

Distributed By: Evergood Unlimited Corp.

901 G.Masangkay St., Manila

Made in China

4. Polish with a soft cloth.

5. Always be sure to wring excess water out of cloth or sponge when cleaning around the

controls or any electrical part.

Lid/Center Lid

Wash in warm soapy water. Rinse by a running water and dry. Reassemble before use.

Container and Blade Assembly:

Method #1

- After use, add warm water and a splash of vinegar to blender jar. Turn ON and let the blender

work the liquid for about a minute. Pour out, rinse the blender jar well.

Method #2

- Fill the blender jar half way with warm water, add a small amount of liquid dish detergent and

turn the unit ON for about 30 seconds. Repeat if needed. Rinse well.

Method #3

- If blender was left sitting until there is dried, crusty food bits inside: fill with warm, soapy water

(or vinegar water) and let sit for about 30 to 60 seconds. Empty water to about half and then

blends for 30 second intervals until clean.

1. Turn OFF the unit and wait for the blade and motor to stop.

2. Always unplug the unit after every use.

3. Remove the blade assembly by turning it clockwise.

4. Wash the rubber packing, blade and jar support with soap and water.

5. Turn the plastic jar upside down to remove excess water.

6. Wipe the plastic jar and blade with soft cloth to dry. Make sure to reassemble the unit

properly before storing it.

7. Never leave food inside the blender jar for a long period of time.

8. Store the blender on a dry cool place.

NOTE: NEVER ALLOW THE BOTTOM OF THE BLADE TO GET WET.

TROUBLE SHOOTING:

PROBLEM

CAUSE

SOLUTION

Motor not

working

1. Convenience

outlet is not

working.

2. Damage on the

unit

1. Check the outlet where the

unit is plug in if it is working.

2. Check for any damage.

3. Bring the unit to the nearest

Authorized Imarflex Service

Center

Motor stop

during

operation

1. Overload

protection

activated

1. Unplug and let the unit rest

for at least 1 minute

Smoke and

burnt smell

occurred

1. Unit is use for the

first time

1. Its normal for the first use

Leak on

the bottom

of the jar

1. Rubber packing is

not properly

installed

2. Rubber was

damaged

1. Turn OFF the unit. Remove

the jar and check the rubber.

Reassemble the unit.

2. Replace the rubber with the

new one.

3. Bring the unit to the nearest

Authorized Imarflex Service

Center.

Attachment

not

functioning

1. Not properly install

1. Turn off the unit and

check the assembly

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Imarflex IB-635G Blender. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Imarflex. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Imarflex IB-635G Blender på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Imarflex Blenders
Fler bruksanvisningar för Blenders

Vanliga frågor om Imarflex IB-635G Blender

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Imarflex ICB-2600PRO Blender

Bruksanvisning

Imarflex IB-200P Blender

Bruksanvisning

Imarflex IB-250P Blender

Bruksanvisning

Imarflex ICB-1500PRO Blender

Bruksanvisning

Imarflex ICB-1900PRO Blender

Bruksanvisning

Imarflex ICB-450GS Blender

Bruksanvisning

Imarflex IB-350P Blender

Bruksanvisning

Imarflex IB-450F Blender

Relaterade kategorier