Bruksanvisning Hozelock 1760 EasyClear 3000 Fontänpump

Bruksanvisning

according to local regulations and fit the new

lamp.

4 - Slide the quartz tube down over the lamp. Ensure

that the two o-rings at the base of the quartz tube

are clean and free from debris.

5 - Slide the locking collar down over the quartz tube



the stop of the locking collar hits the stop of the

housing so that the collar cannot be screwed

down any more.

6 - Reassemble the bayonet tube and screw and

restart (Fig 8-S).

Warning! Ensure that the quartz tube is assembled

correctly so that it provides a completely watertight

seal.

Check the condition of the two o-rings on the Quartz

Tube Assembly (Fig 9-T-iii). If these are damaged in

any way or you cannot guarantee a water tight seal,

contact Hozelock Consumer Services.

Biological Filter

Normally, there is no need to remove the biomedia

as any cleaning may kill the colonies of bacteria that

make toxic waste harmless. However if the biomedia

becomes heavily clogged and does require cleaning

follow this procedure.

1 - Remove the foam.

2 - The bag of Kaldnes Biomedia (Fig 7-P) can then be

removed for cleaning.

3 - Wash in pond water.

4 - Reassemble the filter and restart.

Rotor Cleaning/Replacement

If the no water is being pumped or flow is reduced,

remove the quartz tube and lamp as described above,

then follow the below procedure.

1 - Release the Foam Cover by pushing the two

buttons (Fig 5-M) and lift the cover (Fig 6-N).

2 - Remove the foam (Fig 7-O), biomedia (Fig 7-P)

and stone bag.

3 - Turn the unit over and remove the 4 fixing screws

(Fig 10-V) and lift the base clear.

4 - Remove the 2 fixing screws (Fig 10-W) and lift the

Pump Assembly clear.

5 - Twist the Pump Chamber anticlockwise (Fig 10-X)

and lift clear. The rotor can now be pulled out



Important! Take extra care so as to not drop

any of the small components. See Fig 10A for

assembly of the rotor.

6 - Reassemble the pump and 2 off fixing screws (Fig

10-W).

7 - Reroute the cable (Fig 10-Z).

8 - Reassemble the filter, and restart.



A quick daily check should be carried out to ensure

that the pump is performing satisfactorily.

Once a week- Remove the outer casing and Fountain

Head in accordance with the general maintenance

notes.

Depending on pond water conditions, cleaning may be

required more frequently.

Once a year- Completely disassemble the unit

including the Rotor Assembly as described in the

general maintenance notes, and wash all components

in clean, freshwater.

Replace worn or broken parts.

Winter Storage

When not in use, the unit should be removed,

thoroughly washed and cleaned, dried and stored in

a dry frost protected area. Always store the unit with

the foam and foam cover off to ensure adequate

ventilation anddrying.



For product advice and spares please contact

Hozelock Cyprio Consumer Services on 0121 313 1122

or visit www.hozelock.com

Fish Stocking and Density

Under normal conditions, the EasyClear™ 3000 or

4500 will support up to 72cm of fish. Introduce fish

slowly over the first few weeks, up to 20% of the

maximum recommended level, increasing to 50% after

six months. The balance will allow for fish growth.

Hozelock Cyprio Clearwater Guarantee

WE GUARANTEE YOU CLEAR WATER OR YOUR

MONEY BACK.

NOTE: IN SOME CASES IT CAN TAKE UP TO 6-8

WEEKS FOR YOUR WATER TO BECOME CLEAR.

This guarantee runs for 12 months after purchase,

provided that



instructions.



stocking level.



enough for any problems to be put right.



A refund can only be authorised by Hozelock Cyprio

and is made only at the place of purchase to the

value of the purchase price of the EasyClear™ only.

A Proof of Purchase will be required.Please note that

the Clearwater Guarantee does not cover loss of water

clarity when blanketweed, as opposed to greenwater

algae, is the cause.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Hozelock 1760 EasyClear 3000 Fontänpump. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Hozelock. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Hozelock 1760 EasyClear 3000 Fontänpump på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Hozelock Fontänpumpar
Fler bruksanvisningar för Fontänpumpar

Relaterade produkter

Bruksanvisning

Hozelock 3354 Cascade 1500 Fontänpump

Bruksanvisning

Hozelock 1584A Aquaforce 8000 Fontänpump

Bruksanvisning

Hozelock 1768 EasyClear 9000 Fontänpump

Bruksanvisning

Hozelock 3334 Cascade 3000 Fontänpump

Bruksanvisning

Hozelock 3352 Cascade 700 Fontänpump

Bruksanvisning

Hozelock 1585A Aquaforce 12000 Fontänpump

Bruksanvisning

Hozelock 1586A Aquaforce 15000 Fontänpump

Bruksanvisning

Hozelock 1580 Aquaforce 1000 Fontänpump

Relaterade kategorier