Bruksanvisning Hotpoint FML 842 K UK Tvättmaskin

Bruksanvisning

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash

care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Anti Stain

The programme is suitable to heavily-soiled garments with resistant

colours. It ensures a washing class that is higher than the standard class (A

class). When running the programme, do not mix garments of dierent

colours. We recommend the use of powder detergent. Pre-treatment with

special additives is recommended if there are obstinate stains.

Whites

Heavily soiled whites and resistant colours.

Cotton

Lightly soiled resistant and delicate colours.

Eco Cotton 60° - 40°

Suitable for washing moderately soiled cotton garments. At 40°C and

60°C it is the standard cycle for washing cotton garments, and is the most

ecient in terms of combined water and electricity consumption.

Synthetics

Suitable for washing moderately soiled garments made of synthetic bres

(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.

Anti Allergy Plus

Suitable for removing major allergens such as pollen, mites and cat or dog hair.

Baby

Use the special wash cycle to remove the soiling typically caused by

babies, while removing all traces of detergent from nappies in order to

prevent the delicate skin of babies from suering allergic reactions. The

cycle has been designed to reduce the amount of bacteria by using a

greater quantity of water and optimising the eect of special disinfecting

additives added to the detergent.

Bed & Bath

Use programme to wash bed linen and towels in one single cycle: it

optimises softener performance and helps you save time and energy. We

recommend the use of powder detergent.

Fast Wash 60’

For washing normal soiled garments in a short time. Not suitable for wool,

silk and garments to be washed by hand.

Fast Wash 30’

For washing lightly soiled garments in a short time. Not suitable for wool,

silk and garments to be washed by hand.

Cotton 20°C

The programme ideal for lightly soiled cotton loads. The eective

performance levels achieved at cold temperatures, which are comparable

to washing at 40°, are guaranteed by a mechanical action which operates

at varying speed, with repeated and frequent peaks.

Shirts

Use the special wash cycle to wash shirts in dierent fabrics and colours

to guarantee they receive the best possible care.

Wool - Woolmark Apparel Care - Green:

The “Wool” wash cycle is approved by the Woolmark

Company for washing wool garments classied as

“hand-washable”, provided that the wash complies with

the instructions appearing on the garment’s label and

with those provided by the manufacturer of this washing

machine. (M1127)

Delicates

For washing very delicate garments. It is advisable to turn the garments

inside out before washing them. For best results, use liquid detergent on

delicate garments. Use liquid detergent on delicate garments for best results.

To wash silk garments and curtains select cycle 14 and then option “Easy Iron”;

the machine will end the cycle while the laundry is soaking, the “Easy Iron” and

START/PAUSE indicator lights will ash (orange) and the RINSE phase will

remain lit in a xed manner. To drain the water so that the laundry may be

removed, press the START/PAUSE button or the “Easy Iron” button.

Rinse

Designed for rinsing and spinning.

Spin + Pump out

Designed for spinning and draining the water.

INDICATOR LIGHTS

The indicator lights provide important information. This is what they can tell you:

Wash cycle phase indicator lights

Once the desired wash cycle has been selected and has begun, the

indicator lights switch on one by one to indicate which phase of the cycle

is currently in progress.

Door locked indicator light

If this indicator light is on, the appliance door is locked to prevent it from

being opened accidentally; to avoid any damage, wait for the indicator

light to switch o before you open the appliance door (wait

approximately 3 minutes).

! If the START/PAUSE indicator light (orange) ashes rapidly at the same

time as the option indicator light, this indicates a problem has occurred

(see “Troubleshooting”).

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst

time, run a wash cycle with detergent and no laundry, by setting the

“Auto-Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the

“TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button ; all the indicator lights will turn on for a few

seconds, then only the indicator lights relative to the selected programme

settings will remain lit and the START/PAUSE indicator light will ash.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments, as described in the “DETERGENT DISPENSER

DRAWER” section.

- Close the door.

- Select the desired wash cycle.

- Set the washing temperature.

- Set the spin speed.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative

indicator light will light up steady green and the door will lock (the

indicator light will switch on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the

indicator light will ash amber. To start the wash cycle from the point at

which it was interrupted, press the START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the indicator light turns on to signal that the door

cannot be opened. While a wash cycle is running, the door remains

locked. To open the door while a cycle is under way, for example, to add

or remove garments, press the START/PAUSE button to pause the

cycle; the indicator light will ash amber. If the indicator light is not lit,

the door may be opened. Press the START/PAUSE button again to

continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine

using the START/PAUSE button (the relative indicator light will ash

amber), then select the desired cycle and press the START/PAUSE

button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch o.

AT THE END OF THE WASH CYCLE

At the end of the wash cycle the indicator light will switch on; when

the indicator light switches o, the door may be opened (wait

approximately 3 minutes). Open the door, unload the laundry and switch

o the machine. If you do not press ON/OFF button, the washing

machine will switch o automatically after about a half of an hour.

OPTIONS

- If the selected option is not compatible with the programmed wash

cycle, the corresponding indicator light will ash and a sound alert (3

beeps); the option will not be activated.

- If a option which is incompatible with another function selected

previously, only the most recent selection will remain active.

Super Wash

This option oers a high-performance wash due to the greater quantity of

water used in the initial phase of the cycle, and due to the increased wash

cycle duration, is particularly useful for the removal of stubborn stains.

Extra Rinse

Selecting this option allows for enhancing rinsing eciency and fully

removing the detergent. It is particularly useful for sensitive skin.

Easy Iron

By selecting this function, the wash and spin cycles will be modied in

order to reduce the formation of creases. At the end of the cycle the

washing machine will perform slow rotations of the drum; the EASY IRON

and START/PAUSE indicator lights will ash (orange) and the phase

will remain lit in a xed manner. To end the cycle, press the START/PAUSE

button or the EASY IRON button.

Timer Saver

If you select this option, the wash cycle duration will be reduced by up to

50%, depending on the selected cycle, thereby guaranteeing

simultaneous water and energy saving. Use this cycle for lightly soiled

garments.

Wash

Rinse

Spin

Pump out

End of wash cycle

END

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Hotpoint FML 842 K UK Tvättmaskin. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Hotpoint. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Hotpoint FML 842 K UK Tvättmaskin på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Hotpoint Tvättmaskiner
Fler bruksanvisningar för Tvättmaskiner

Vanliga frågor om Hotpoint FML 842 K UK Tvättmaskin

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Hotpoint NLLCD 947 WD ADW UK Tvättmaskin

Bruksanvisning

Hotpoint NLLCD 1044 WD AW UK N Tvättmaskin

Bruksanvisning

Hotpoint NSWA 1043C WW UK N Tvättmaskin

Bruksanvisning

Hotpoint NSWR 943C WK UK N Tvättmaskin

Bruksanvisning

Hotpoint NSWF 742U GG UK N Tvättmaskin

Bruksanvisning

Hotpoint NSWF 943C GG UK N Tvättmaskin

Bruksanvisning

Hotpoint NSWF 943C W UK N Tvättmaskin

Bruksanvisning

Hotpoint NSWM 863C GG UK N Tvättmaskin

Relaterade kategorier