Bruksanvisning Hoover MI70_MI01011 Dammsugare

Bruksanvisning

ACCESSORIES AND NOZZLES

5. Use the dusting brush [1S] when necessary to remove excessive dust from the internal

surface of the dust bin.

6. Close the dust container flap and relocate the pre-motor filter frame on top of it,

ensuring the latch is well closed. Then refit the dust container into the cleaner.

Cleaning the Washable Filters

The cleaner is fitted with a pre-motor filter. To maintain optimum cleaning performance,

regularly clean the filters. Remove excess dust from the filters by gently tapping them

against the side of a bin. The filters should be washed after every 5 container empties.

IMPORTANT: All bagless cleaners require regular filter cleaning. Failure to clean your

filters may result in air blockage, overheating and product failure. This may invalidate

your guarantee.

IMPORTANT: Regularly check and maintain the filters by following the filter

maintenance instructions , it is also recommended that you purchase new filters after

every 3rd filter wash. This will maintain your cleaners performance.

To access the pre-motor filter:

1. Remove the Dust Container from the cleaner mainbody. [19]

2. Hold the Dust Container over a bin with one hand, Hold the dust container upside

down so that the pre-motor filter faces upwards. Unlatch then unhinge the pre-motor

filter frame and remove the pre-motor filter from the frame. [21]

3. Gently tap and wash the filter packs using hand warm water. [22] Remove excess water

from the filters with a dry cloth and leave to dry fully before re-using.

4. Reassemble filter packs once fully dry and refit to the cleane.

IMPORTANT: Do not use the product without the pre-motor filter pack fitted.

IMPORTANT: Always ensure the filter packs are fully dry before use.

To access the exhaust filter:

1. Unlock the exhaust filter cover by sliding the button towards the rear of the cleaner.

2. Remove the filter pack from the recess. [20]

3. Gently tap and wash the filter pack using hand warm water. [22] Remove excess water

from the filters with a dry cloth and leave to dry fully before re-using. Reassemble filter

packs once fully dry and refit to the cleaner.

Remember: Do not use hot water or detergents. In the unlikely event of the filters

becoming damaged, fit a Genuine Hoover consumable. Do not try and use the product

without a filter fitted.

*Certain Models Only ** Certain models only, nozzles may vary according to model

3

GB

Removing a Blockage

1. Check if the dust container is full. If so refer to ‘Emptying The Dust Container’.

2. If the dust container is empty, but suction is still low:

A. Do the filters need cleaning? If so refer to ‘Cleaning the Washable Filters’.

B. Check if there is any other blockage in the system - Use a rod or a pole to remove

any blockage from the tubes or hose.

C. Check for and clear any blockage in the nozzle.

Warning - If the cleaner is used for a significant period of time with a blockage, a thermal

cut out will switch the cleaner off to prevent overheating. If this should happen, switch

the cleaner off, unplug and correct the fault. It will take about 45 minutes for the cut out

to automatically reset.

To obtain the best performance and energy efficiency

#1

it is recommended that the

correct nozzles are used for the main cleaning operations. These nozzles are indicated in

the diagrams by the letters GP, HF or CA.

A nozzle type GP can be used to clean both carpet and hard floor.

A nozzle type HF is suitable for use only on hard floor.

A nozzle of type CA is suitable for use only on carpet.

The other nozzles are accessories for specialist cleaning tasks and are recommended for

occasional use only.

It is important to note that this vacuum cleaner is supplied with an Energy Label as required

by European Regulation (EU) 665/2013.

If the label shows a red prohibition circle on the left covering the carpet symbol, then this

indicates that the vacuum cleaner is not suitable use on carpets.

If the label shows a red prohibition circle on the right covering the hard floor symbol, then

this indicates that the vacuum cleaneris not suitable for use on hard floors.

#1

NOTE: Dust pick up ability carpet, dust pick up ability hard floor, and energy efficiency

in accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.

All accessories can be fitted to the handle or the end of the telescopic tube.

Crevice Tool [1R]– For corners and hard to reach areas. Remove the Crevice tool from the

accessories holder [24] and fit to the handle [25] or telescopic tube.

Dusting Brush [1S] – For bookshelves, frames, keyboards and other delicate areas. Remove

the dusting brush from the accessories holder [24] and fit to the crevice tool then fit to the

handle [25] or telescopic tube.

Parquet Nozzle** – For parquet floors and other delicate floors. [1V]

Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs

removal. [1W]

Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen

removal. [1X]

Grand Turbo Nozzle* – Use the Grand Turbo Nozzle for deep cleaning on carpets. [1Y]

IMPORTANT: Do not use the Grand Turbo Nozzle or Mini Turbo Nozzles on rugs with long

fringes, animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary

while the brush is rotating.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Hoover MI70_MI01011 Dammsugare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Hoover. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Hoover MI70_MI01011 Dammsugare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Hoover Dammsugare
Fler bruksanvisningar för Dammsugare

Vanliga frågor om Hoover MI70_MI01011 Dammsugare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Hoover HYP1630 011 Dammsugare

Bruksanvisning

Hoover TE70_EN25001 Dammsugare

Bruksanvisning

Hoover TS1420 019 Dammsugare

Bruksanvisning

Hoover HF222RH 001 Dammsugare

Bruksanvisning

Hoover RA22ALG 019 Dammsugare

Bruksanvisning

Hoover TS2355/1 011 Dammsugare

Bruksanvisning

Hoover XP71_ID20001 Dammsugare

Bruksanvisning

Hoover S4438 AquaPlus Dammsugare

Relaterade kategorier