Bruksanvisning Honeywell HT-116E Fläkt

Bruksanvisning

4

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

1. Please read all instructions before using this fan.

2. Only use this fan as described in this manual. Other non-

recommended use may cause fire, electric shock, or injury.

3. Only connect the fan to a single-phase power socket with the

current as stated on its type plate.

4. Connect power after the fan has been fully assembled. Unplug

from outlet when moving fan from one location to another,

before putting on or taking off parts and before cleaning.

Disconnect the fan when not in use. Do not tug at the power cord

to disconnect the plug.

5. Supervision is needed when the fan is used anywhere near

children. This appliance is not intended for use by children or

other persons without assistance or supervision if their physical,

sensory or mental capabilities prevent them from using it safely.

6. If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified person in

order to avoid a hazard.

7. Unwind the power cord completely. An incompletely unwound

power cord can lead to overheating and cause a fire. Do not touch

the power cord with wet hands. Position the power cord so that

nobody can trip over it and where the socket can be reached

easily.

8. Do not use an infinitely variable speed controller. This can lead

to overheating, fire, electric shock or faults in the appliance.

9. Do not operate the fan without the protective front and rear

grilles in position. Do not touch the rotating fan blades with any

part of the body. This can cause personal injury and damage.

10. Never insert fingers, pencils, or any other object through the

grille when fan is running.

11. Do not operate the fan if it is damaged or might be defective,

or if it is not working properly. Remove the power plug from the

socket.

12. Do not use the fan anywhere near easily inflammable gases or

substances such as solvents, lacquers, glues etc.

13. The fan is only designed for private use in indoor rooms and

is not intended for outdoor or for commercial use. Do not use the

fan anywhere near a bathtub, a shower or a swimming pool, or

anywhere else where water could splash.

14. Do not plunge the fan into water or any other liquids and do

not pour water or any other liquids over the fan.

15. Place the fan on a firm, even, dry surface. Be sure the fan is on

a stable surface when operating to avoid overturning. Make sure

the fan is standing securely so that it cannot tip over or fall down.

Maintain a safety distance of at least 50 cm from other objects.

16. Clean the fan regularly by following the cleaning instructions.

COMPONENTS

1. Front Grille

2. Spinner

3. Blades

4. Plastic Nut

5. Rear Grille

6. Motor Shaft

7. Speed Knob

8. Oscillating Clutch Knob

9. Motor Housing

10. Tilt Adjustment Knob

11. Power Supply Cord with Plug

12. Pedestal

13. Chassis

ASSEMBLY INSTRUCTIONS

Assembly of Fan Pedestal onto Chassis

1. Take the chassis and pedestal parts from the packing box

and unscrew the plastic nut on the pedestal (Fig. 1).

2. Insert the pedestal into the chassis by pushing

down until it locks into the chassis (Fig. 2).

3. Tighten the screw from the chassis to lock the

pedestal (Fig. 3).

Assembly of Blade and Grilles

1. Unscrew the spinner clockwise and the nut counter-clockwise,

then remove both of them (Fig. 4).

2. Place the rear grille on the motor shaft so that the handle is at

the top

3. Screw on plastic nut clockwise to attach rear grille tightly.

4. Remove and discard the small plastic sleeve on the motor shaft.

5. Install the blade onto the motor shaft until it reaches the

retaining pin (Fig. 5).

6. Make sure the fan blade slot fits into the retaining pin of the

motor shaft, then tighten the spinner counter-clockwise.

7. Secure both grilles firmly by tightening the screws. 1 Screw and

2 clips for HT-112E, 1 screw and 4 clips for HT-116E (Fig. 6).

HT-112-116_OM.indd 4 1/10/07 8:42:15 AM

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Honeywell HT-116E Fläkt. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Honeywell. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Honeywell HT-116E Fläkt på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Honeywell Fläktar
Fler bruksanvisningar för Fläktar

Vanliga frågor om Honeywell HT-116E Fläkt

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Honeywell HS-400 Fläkt

Bruksanvisning

Honeywell HY-280 QuietSet Fläkt

Bruksanvisning

Honeywell HS-1040RE Fläkt

Bruksanvisning

Honeywell HY-041W Fläkt

Bruksanvisning

Honeywell HTF210B Fläkt

Bruksanvisning

Honeywell HT-800 Fläkt

Bruksanvisning

Honeywell HT-800C Fläkt

Bruksanvisning

Honeywell HY-280-TGT QuietSet Fläkt

Relaterade kategorier