Bruksanvisning Hilti PM 2-LG Linjelaser

Bruksanvisning

5 Safety instructions

WARNING: Ensurethat you read all safety precautions

and instructions.Failure to observe the safety precau-

tions and instructions may result in electric shock, fire

and/or serious injury. Retain all safety precautions and

instructions for future reference.

5.1 General safety measures

a) Check the accuracy of the tool before use and

several times during use.

b) The tool and its ancillary equipment may present

hazards when used incorrectly by untrained per-

sonnel or when used not as directed.

c) Stayalert, watchwhat you are doing and usecom-

mon sense when operating the machine. Don’t

use the machine when you are tired or under the

influence of drugs, alcohol or medication. Amo-

ment of inattention while operating machines may

result in serious personal injury.

d) Modification of the tool is not permissible.

e) Do not render safety devices ineffective and do

not remove information and warning notices.

f) Keep children and other persons away from the

area while the tool or appliance is in use.

g) Take the influences of the surrounding area into

account. Do not expose the tool to rain or snow

and do not use it in damp or wet conditions. Do

notusethetoolwherethereisariskoffireor

explosion.

h) Maintain the machine carefully. Check for mis-

alignment or binding of moving parts, breakage

of parts and any other condition that may affect

the machine’s operation. If damaged, have the

machine repaired before use. Poor maintenance is

the cause of many accidents.

i) Have your power tool serviced by a qualified re-

pair person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

j) The user must check the accuracy of the tool

after it has been dropped or subjected to other

mechanical stresses.

k) When the tool is brought into a warm environment

from very cold conditions, or vice-versa, allow it

to become acclimatized before use.

l) Make sure that the tool is mounted securely when

adapters or accessories are used.

m) Keep the laser exit aperture clean to avoid meas-

urement errors.

n) Although the tool is designed for the tough condi-

tions of jobsite use, as with other optical and elec-

tronic instruments (e.g. binoculars, spectacles,

cameras) it should be treated with care.

o) Do not use a tool if its switch is defective. Atool

that cannot be controlled by the switch (switched on

and off) is dangerous and must be repaired.

p) To achieve maximum accuracy, project the line

onto a vertical, flat surface. When doing so, set

up the tool at 90° to the surface.

5.2 Proper organization of the workplace

a) Secure the area in which you are working and

take care to avoid directing the beam towards

other persons or towards yourself when setting

up the tool.

b) Measurements taken through panes of glass or other

objects may be inaccurate.

c) Ensure that the tool is set up on a steady, level

surface (not subject to vibration).

d) Use the tool only within its specified limits.

e) If several laser tools are used in the same working

area, care must be taken to avoid confusing the

beams.

f) Strong magnetic fields may affect the accuracy of

the tool. Magnetic objects should thus be kept away

from the measuring tool. Hilti magnetic adapters may

be used.

g) Do not use the tool in the proximity of medical instru-

ments.

5.3 Electromagnetic compatibility

Although the tool complies with the strict requirements

of the applicable directives, Hilti cannot entirely rule out

the possibility of the tool being subject to interference

caused by powerful electromagnetic radiation, leading

to incorrect operation. Check the accuracy of the tool

by taking measurements by other means when working

under such conditions or if you are unsure. Likewise, Hilti

cannot rule out the possibility of interference with other

devices (e.g. aircraft navigation equipment).

5.4 Laser classification for laser class 2/class II

tools

Depending on the version purchased, the tool complies

with Laser Class 2 in accordance with IEC825-1:2007 /

EN60825-1:2007 and Class II in accordance with CFR

21 § 1040 (FDA). This tool may be used without need

for further protective measures. Nevertheless, as with the

sun, one should not look directly into sources of bright

light. In the event of direct eye contact with the laser

beam, close your eyes and move your head out of the

path of the laser beam. Do not direct the laser beam

toward persons.

5.5 Electrical

a) Remove the batteries before storing or transport-

ing the tool.

b) Keep the batteries out of reach of children.

c) Do not allow the batteries to overheat and do not

expose them to fire. The batteries may explode or

release toxic substances.

d) Do not charge the batteries.

e) Do not solder the batteries into the tool.

f) Do not discharge the batteries by short circuiting

as this may cause them to overheat and present

a risk of personal injury (burns).

en

13

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Hilti PM 2-LG Linjelaser. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Hilti. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Hilti PM 2-LG Linjelaser på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Hilti Linjelasrar
Fler bruksanvisningar för Linjelasrar

Relaterade produkter

Bruksanvisning

Hilti PM 2-L Linjelaser

Bruksanvisning

Parkside IAN 322432 Linjelaser

Bruksanvisning

Parkside IAN 445905 Linjelaser

Bruksanvisning

Bosch GLL 5-50 X Linjelaser

Bruksanvisning

Parkside PKLL 7 C3 Linjelaser

Bruksanvisning

Bosch PCL 10 Linjelaser

Bruksanvisning

Ryobi RBCLLR1 Linjelaser

Bruksanvisning

DeWalt DCLE14201RB Linjelaser

Relaterade kategorier