Bruksanvisning Graphite 58G537 Slagborrmaskin

Bruksanvisning

7

Modes of operation

The hammer drill has two mode dials fig. C.

After the individual operating modes, set the dial to the following positions:

1. Drilling without impact Fig. C1

2. Drilling with impact Figure C2

3. Positioning the flat chisel in the optimum position fig. C3

4. Chiselling/forging Fig. C4

MAINTENANCE AND STORAGE

Pull the mains plug before any maintenance work on the unit.

To ensure safe and correct working, always keep the machine and the

ventilation slots clean. Clean the tool holder after each working day.

Replacing the dust cover

Damaged dust protection caps should be replaced, as dust that gets into

the tool holder can cause it to fail.

If a machine malfunctions despite the care taken in production and testing,

the repair should be carried out by an authorised qualified service.

KIT CONTENTS:

• Hammer drill

• SDS+ drill bit

• Drill depth limiter

• Drill chuck with key

• Technical documentation

• Transport case

Rated data

Supply voltage

230 V AC

Supply frequency

50 Hz

Rated power

710 W

No-load speed

0 - 1350 min

-1

Impact frequency

0 - 5500 min

-1

Impact energy

2.6 J

Maximum drilling diameter in:

Concrete

24 mm

Wood

30 mm

Steel

13 mm

Tool holder type

SDS Plus

IP degree of protection

IPX0

Protection class

II

Mass

3.15 kg

Year of production

2023

58G537 stands for both type and machine designation

NOISE AND VIBRATION DATA

Sound pressure level

LpA = 91.2 dB (A) K=3dB (A)

Sound power level

LWA = 102.2 dB (A) K=3dB (A)

Vibration acceleration values

Percussion drilling in

concrete

Chisel mode

ah = 17.2 m/s

2

K=1.5 m/s

2

ah = 14.8 m/s

2

K=1.5 m/s

2

Information on noise and vibration

The noise emission level of the equipment is described by: the emitted

sound pressure level LpA and the sound power level LWA (where K denotes

measurement uncertainty). The vibrations emitted by the equipment are

described by the vibration acceleration value ah (where K is the

measurement uncertainty).

The emitted sound pressure level LpA , the sound power level LWA and the

vibration acceleration value ah given in this manual have been measured

in accordance with IEC 62841-2-6. The vibration level ah given can be

used to compare equipment and to make a preliminary assessment of

vibration exposure.

The vibration level quoted is only representative of the basic use of the

unit. If the unit is used for other applications or with other work tools, the

vibration level may change. A higher vibration level will be influenced by

insufficient or too infrequent maintenance of the unit. The reasons given

above may result in increased vibration exposure during the entire working

period.

In order to accurately estimate vibration exposure, it is necessary to

take into account periods when the device is switched off or when it

is switched on but not used for work. When all factors are accurately

estimated, the total vibration exposure may be significantly lower.

In order to protect the user from the effects of vibration, additional safety

measures should be implemented, such as cyclical maintenance of the

machine and working tools, securing an adequate hand temperature and

proper work organisation.

ENVIRONMENTAL PROTECTION

Electrically-powered products should not be disposed of with household

waste, but should be taken to appropriate facilities for disposal. Contact

your product dealer or local authority for information on disposal. Waste

electrical and electronic equipment contains environmentally inert

substances. Equipment that is not recycled poses a potential risk to the

environment and human health.

"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with its

registered office in Warsaw, ul. Pograniczna 2/4 (hereinafter: "Grupa Topex") informs that

all copyrights to the content of this manual (hereinafter: "Manual"), including, among

others. Its text, photographs, diagrams, drawings, as well as its composition, belong

exclusively to Grupa Topex and are subject to legal protection under the Act of 4 February

1994 on Copyright and Related Rights (ie Journal of Laws 2006 No. 90 Poz. 631, as

amended). Copying, processing, publishing, modification for commercial purposes of the

entire Manual and its individual elements, without the consent of Grupa Topex expressed

in writing, is strictly prohibited and may result in civil and criminal liability.

EC Declaration of Conformity

Manufacturer: Grupa Topex Sp. z o.o. Sp.k., Pograniczna 2/4 02-285

Warszawa

Product: SDS+ hammer drill

Model: 58G537

Trade name: GRAPHITE

Serial number: 00001 ÷ 99999

This declaration of conformity is issued under the sole responsibility of

the manufacturer.

The product described above complies with the following documents:

Machinery Directive 2006/42/EC

Electromagnetic Compatibility Directive 2014/30/EU

RoHS Directive 2011/65/EU as amended by Directive 2015/863/EU

And meets the requirements of the standards:

EN 62841-1:2015; EN IEC 62841-2-6:2020+A11; EN ISO 12100:2010;

EN IEC 55014-1:2021; EN IEC 55014-2:2021; EN IEC 61000-3-

2:2019+A1; EN 61000-3-3:2013+A1+A2;

EN IEC 63000:2018

This declaration relates only to the machinery as placed on the market

and does not include components

added by the end user or carried out by him/her subsequently.

Name and address of the EU resident person authorised to prepare the

technical dossier:

Signed on behalf of:

Grupa Topex Sp. z o.o. Sp.k.

2/4 Pograniczna Street

02-285 Warsaw

Paweł Kowalski

TOPEX GROUP Quality Officer

Warsaw, 2022-08-30

DE

ÜBERSETZUNG (BENUTZERHANDBUCH)

Bohrhammer: 58G537

HINWEIS: BEVOR SIE DAS GERÄT BENUTZEN, LESEN SIE BITTE

DIESE ANLEITUNG SORGFÄLTIG DURCH UND BEWAHREN SIE SIE

ZUM NACHSCHLAGEN AUF. PERSONEN, DIE DIE ANLEITUNG

NICHT GELESEN HABEN, DÜRFEN DAS GERÄT NICHT

ZUSAMMENBAUEN, EINSTELLEN ODER BEDIENEN.

BESONDERE SICHERHEITSBESTIMMUNGEN

HINWEIS!

Lesen Sie die Bedienungsanleitung sorgfältig durch, beachten Sie die

darin enthaltenen Warnhinweise und Sicherheitsvorschriften. Das Gerät

wurde für einen sicheren Betrieb konzipiert. Dennoch: Installation,

Wartung und Betrieb des Geräts können gefährlich sein. Wenn Sie die

folgenden Verfahren befolgen, verringern Sie die Gefahr von Bränden,

Stromschlägen und Verletzungen und verkürzen die Installationszeit des

Geräts

SICHERHEITSVORSCHRIFTEN

WARNHINWEISE ZUR ARBEIT MIT EINEM ELEKTROHAMMER

Hinweis: Bevor Sie mit der Einstellung fortfahren,

Wartung oder Reparatur, ziehen Sie das Netzkabel aus dem

Netzsteckdose.

• Beim Hantieren mit dem Hammer sollten eine Schutzbrille, ein

Gehörschutz und ein Schutzhelm getragen werden (wenn die

Gefahr besteht, dass etwas von oben herabfallen kann). Eine

Atemschutzmaske und rutschfestes Schuhwerk werden empfohlen.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Graphite 58G537 Slagborrmaskin. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Graphite. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Graphite 58G537 Slagborrmaskin på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Graphite Slagborrmaskiner
Fler bruksanvisningar för Slagborrmaskiner

Vanliga frågor om Graphite 58G537 Slagborrmaskin

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Hikoki DV 13VSS Slagborrmaskin

Bruksanvisning

Bosch GSB 21-2 RE/RCT Slagborrmaskin

Bruksanvisning

Makita BHP453 Slagborrmaskin

Bruksanvisning

Bosch GBM 13-2 RE Slagborrmaskin

Bruksanvisning

Makita HP1621 Slagborrmaskin

Bruksanvisning

Worx WX312 Slagborrmaskin

Bruksanvisning

Black and Decker KR604RE Slagborrmaskin

Bruksanvisning

Makita HP2070F Slagborrmaskin

Relaterade kategorier