Bruksanvisning First Austria FA-6401 Köksvåg

Bruksanvisning

2 3

INSTRUCTION MANUAL

INSTRUCTION

Please read this instruction carefully in order to

use the scale correctly & keep the scale in good

condition.

FEATURES

1. Indicate volume of water and milk

2. Two weight unit systems g/lb:oz convertible

3. Two volume unit systems ml/’oz convertible

4. Low battery power/Overload indication

5. With high precision strain gauge sensor

6. With tare function

7. Auto off

BATTERY

1 pc lithium battery (CR2032)

Please remove the isolation

sheet from battery contact

before use. Please observe the

polarity.

TO REPLACE BATTERY

1. Open battery case cover on

the back of scale.

2. Bend the small black tab

outwards and the battery will

come out. Take note not to

bend the contact.

3. Install new battery by putting one side

of battery beneath the contact and then

pressing down the other side.

LCD

WORKING MODES

UNIT CONVERSION BUTTON

At the bottom of scale, you can

nd a unit conversion button as

shown in picture.

TO CONVERT WEIGHT UNIT

If the scale is with both unit systems of Metric (g,

ml) or Imperial (lb:oz, ’oz), press MODE button

to choose working mode (weight, milk volume,

water volume), then press

unit conversion

button to convert between two systems. Take

the conversion of weight unit for example: (see

g. 1)

* When setting g as weight unit, the default

volume unit is ml;

* When setting lb: oz as weight unit, the default

volume unit is ’oz.

Remark: The unit system of scale depends

on sales destination or the requirement of

distributor.

TO START WEIGHING



A. Place the scale on a solid and at surface.

B. Place bowl (if used) on the scale before

turning on the scale.

C. Press „ON/OFF“ to enter weighing mode.

D. Wait until LCD shows all information.

E. Load weighing object on to start weighing,

LCD wil l show the weight reading.

F. If the weighing object is water or milk, press

MODE button to choose volume mode and

view the volume of weighing object.

(see g. 3)

A. Place the scale on a solid and at surface.

B. Press“ON/OFF“ to turn on the scale.

C. Wait until LCD shows „0“, and press MODE

button to choose „Water“ or „Milk“ mode.

D. Put a liquid container onto the scale platform.

E. Press ZERO button to reset LCD to „0“.

F. Pour liquid (water or milk) into the container,

LCD shows the volume of the liquid.

G. Press MODE button to choose „Weight“

mode and view the weight of liquid.

„ZERO“ OR „TARE“ FUNCTION

To weigh different loads consecutively without

removing loads from the scale. Put rst Load

on the scale, get weight reading. Press ZERO

button to reset the LCD reading to „0“ before

adding next load. You can repeat this operation.

(see g. 4)







LCD will show „0“ each time ZERO is pressed.

Icon „0“ will show on lower left corner of LCD,

indicating „ZERO“ function is active. Max. weight

capacity remains unchanged.

(see g. 5)







LCD will show „0“ each time ZERO is pressed.

Icon „T“ will show on upper left corner of LCD,

indicating „TARE“ function is active. Max. weight

capacity is reduced by total weight of all loads.



By pressing ZERO, you can see the total weight

of all loads on the scale. If you want to weigh

more loads, just press ZERO to reset LCD

reading to ‚0‘ again.

AUTO SHUT OFF

Auto shut-off occurs if display

shows ‚0‘ or shows the same

weight reading for 2 minutes.

MANUAL SHUT OFF

To maximize battery life, always

press ON/OFF again to turn off

the scale after using.

Note: when display shows „0“,

press „ON/OFF“ to turn off the

scale; when display shows weight reading, press

„ON/OFF“ for 3 seconds to turn off the scale.

WARNING INDICATORS

1. Replace new battery.

2. Scale overload. Remove

item to avoid damage. Max.

weight capacity is indicated

on the scale.

CLEANING AND CARE

1. Clean the scale with a slightly damp cloth.

DO NOT immerse the scale in water or use

chemical/abrasive cleaning agents.

2. All plastic parts should be cleaned

immediately after contact with fats, spices,

vinegar and strongly avored/colored foods.

Avoid contact with acids citrus juices.

3. Always use the scale on a hard, at surface.

DO NOT use on carpet.

ENGLISH

ENGLISH

N

i

1



3

4 

M_6400-1_6400_01_v02.indd 2-3 12-9-5 下午6:14

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din First Austria FA-6401 Köksvåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar First Austria. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din First Austria FA-6401 Köksvåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för First Austria Köksvågar
Fler bruksanvisningar för Köksvågar

Vanliga frågor om First Austria FA-6401 Köksvåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

First Austria FA-6400 Köksvåg

Bruksanvisning

First Austria FA-6410 Köksvåg

Bruksanvisning

First Austria FA-6408 Köksvåg

Bruksanvisning

First Austria FA-6407-1 Köksvåg

Bruksanvisning

First Austria FA-6401-1 Köksvåg

Bruksanvisning

Escali L3000 Köksvåg

Bruksanvisning

Cecotec Cook Control 10400 EasyHang Köksvåg

Bruksanvisning

Black and Decker SK5500 Köksvåg

Relaterade kategorier