Bruksanvisning FERM RSM4002 Tigersåg

Bruksanvisning

10 Ferm

SPARE PARTS LIST FRS-600N

REF NR DESCRIPTION FERM NR

408730 SOCKET HEAD SCREW 005

408731 HOLD DOWN PLATE 006

408732 SAW MECHANISM COMPLETE 007 T/M 10+12+15

408733 SPRING 013

408734 NEEDLE ROLLER BEARING 017

408735 BIG GEAR + PIN 019 + 020

408736 LIFTING KNIFE PLATE 023

408737 GUIDE BLOCK 025

408738 BAFFLE COMPLETE 028 + 029 + 030

408740 LOCALIZING PIN 035

408741 PENDULAR BUTTON 036

408742 THIMBLE 037

408743 SPRING 038

408744 SWITCH DRAW BAR COMPLETE 041 T/M 044

408745 CIRCUIT PLATE 046

408746 SWITCH 047

408747 STATOR 050

800607 BEARING 607 Z 051

408748 CARBON BRUSH SET 052

408749 CARBON BRUSH HOLDER 053 + 054

408750 ROTOR 055

806000 BEARING 6000 Z 056

408751 SOCKET SCREW KEY _

OPERATIONAL SAFETY

Warning! Always use a suitable dust mask and

eye protection in addition to other safety equip-

ment when using this saw

Never use the machine for sawing asbestos. If asbestos is dis-

covered or suspected, contact your local council for advice.

Concentrate

Routine and repetition can lead to mistakes. Remember

that a slight lack of concentration can result in serious

injuries in a split second.

Keep work area clean

Cluttered areas and benches invite injuries.

Consider the work environment

Make sure you work on a stable base.

Do not use tools, which require two-handed operation

on ladders.

If you use a ladder ensure it’s at a safe angle and secured at

the base and to the building or structure.

Do not expose power tools to rain or use them in damp

or wet locations. Keep work area well lit.

Do not use power tools in the presence of flammable

liquids, vapours or gases.

Guard against electric shock

This unit contains dangerous voltages. Use a RCD (resi-

dual current device) to provide protection against elec-

trical shock. Prevent body contact with grounded sur-

faces (e.g. pipes, radiator, ranges or refrigerators).

Keep children and pets away

Do not let children or pets come into contact with the

tool, extension cable or work area.

Do not force the tool

It will work better and safer at the rate for which it was

intended.

Use the right tool

Do not force small tools or attachments to do the job of a

heavy-duty tool.

Do not use tools for purposes for which they were not

intended; for example do not use a circular saw for cut-

ting trees or logs.

Do not abuse the plug and cable

Never carry the tool by the cable or pull it to disconnect

it from the power socket.

Keep the cable away from heat, oil and sharp edges.

Do not touch the metal plug pins when connecting or

removing the plug.

Secure Work

Use clamps or a vice to hold work. It is safer than using

your hand and it frees both hands to operate the tool.

Be aware that this saw is a powerful machine. You

must use two hands to control it.

Do not over-reach

Keep a proper footing and balance at all times.

Disconnect tools from power supply

When not in use, before servicing and when changing

accessories such as blades, bits and cutters.

Always switch off and unplug the saw from the

power supply before making adjustments or chan-

ging blades .

Remove adjusting keys and wrenches

Ensure that they are removed from the tool before swit-

ching on.

Avoid unintentional starting

Do not carry plugged in tools with your finger on the

switch. Check that the switch is off before plugging in to

socket.

Extension cables

Use only three core earthed extension cables suitable

for the power input of the tool (minimum cable size

1.5mm

2

). Plug into an earthed socket only.

Use a RCD (residual current device) to provide protec-

tion against electrical shock

When using a cable reel unwind it fully. Do not use long

extension cables.

Outdoors use

If the tool is suitable to be used outdoors, only use an

extension cable intended for outdoor use and marked

accordingly.

Use a RCD (residual current device) to provide protec-

tion against electrical shock.

Do not use in rain or damp conditions.

Connect a dust extraction device

Whenever there are facilities for fitting a dust or fume

extraction system, make sure it is connected and used.

Use recommended accessories

The use of any other accessory or attachment other than

recommended in the instructions or catalogue may pre-

sent a risk of personal injury. Use extension cables suita-

ble for the power input of the saw (minimum cable size

1.5mm

2

). When using a cable reel unwind the cable fully.

Ferm 3

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din FERM RSM4002 Tigersåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar FERM. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din FERM RSM4002 Tigersåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för FERM Tigersågar
Fler bruksanvisningar för Tigersågar

Vanliga frågor om FERM RSM4002 Tigersåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

FERM RSM1018 Tigersåg

Bruksanvisning

FERM RSM1001 Tigersåg

Bruksanvisning

FERM RSM1008 Tigersåg

Bruksanvisning

FERM RSM1017 Tigersåg

Bruksanvisning

FERM RSM1015 Tigersåg

Bruksanvisning

FERM RSM1013 Tigersåg

Bruksanvisning

FERM RCM1002 Tigersåg

Bruksanvisning

FERM RSM1016 Tigersåg

Relaterade kategorier