Bruksanvisning FERM PDM1019 Slagborrmaskin

Bruksanvisning

• Pull the mainsplug from the socket before you

change a drill or accessory.

WHEN OPERATING THE MACHINE:

• Check if the switch is placed in the ‘OFF’-position

before you connect the machine to mains.

• Keep the mains cable away from moving parts of the

machine.

• First switch off the machine before you move the

machine downwards along your body.

• Never cover the ventilation slots.

IMMEDIATELY SWITCH OFF THE MACHINE

IN CASE OF:

• Excessive sparking of the brushes and verticiliosis in

the collector.

• Malfunction of the mainsplug, -socket or damaged

cables.

• Broken switch.

• Smoke or smell caused by scorched insulation.

• On LIVE CIRCUITS, voltage testers that also serve as

screwdrivers may only be used to test voltage and

NOT for any other purpose.

• Do NOT use defective or damaged voltage testers!

3. ASSEMBLY

USE ONLY SHARP DRILLS OF THE

FOLLOWING TYPES

Fig.B

Concrete/masonry

|

Hard metal

Metal

|

HSS

Wood

|

HSS

MOUNTING ACCESSORIES

Fig.C

Prior to mounting an accessory always unplug the

tool.

Place a drill or accessory before you connect the

machine to mains.

• Open and close the chuck with the chuck key.

• By placing the chuck key in one of the three holes in

the chuck, the chuck can be opened by turning the

chuck key counter clockwise and closed by turning

the chuck key clockwise. Because the chuck has

three clamps the drill will be centered automatically.

• Slide the sidegrip over the drillhead.

• Slide the measuring rod in the sidegrip and tighten

the grip by turning the wingnut clockwise.

•

Tighten the workpiece to a workbench by using a clamp.

• When all preparations are done the machine can be

connected to mains. First check if the switch is in the

‘OFF’-position and if the rotationswitch is in the

RIGHT-position.

• Always place the drillhead spanner on top of the

machine in the holder.

VOLTAGE TESTER

Use

• Suitable for alternating current to a maximum of 250

Volts.

• The voltage tester must be tested shortly before use

for correct operation.

• When used properly, the lamp in the handle glows as

soon as the voltage reaches 100 - 250 Volts and an

earth connection is made.

• Correct operation of the tester is guaranteed for

temperatures from -10 °C to +50 °C and for

frequencies from 50 to 500 Hz.

Safety

• The voltages indicated on the voltage tester are

nominal voltages.

• The voltage tester may only be used within the

indicated voltage range.

• The visibility of the light emitted by the lamp can be

negatively influenced by the ambient lighting

conditions (for example, direct sunlight) or

unfavourable viewing conditions (for example, while

standing on a ladder).

• Indication is not guaranteed for insulated floors and

non-earthed alternating current circuits.

• In the event of precipitation (rain, dew, and so forth)

and damp areas, the voltage tester may NOT be

used.

4. USE

THE ON/OFF SWITCH

Fig.D

• Switch the machine on by pressing the triggerswitch

(A). When you release the triggerswitch (A) the

machine will turn off.

SWITCH-LOCK

• You can lock the On/Off switch by pressing the

triggerswitch (A) and then pressing knob (B). Release

the switch-lock by pressing the triggerswitch (A)

shortly.

SPEED-CONTROL

• The rotation-speed can be continuously adjusted

between 0 and 2500 rotations per minute by

pressing the switch (A) deeper or less deep.

ADJUSTING OF THE MAXIMUM

ROTATIONSPEED

• Switch the machine on by pressing triggerswitch (A).

• Lock the triggerswitch (A) by pressing knob (B).

• Adjust the speed by turning the small wheel (C) to

the desired maximum rotation speed.

SWITCHING THE DIRECTION OF

ROTATION

• Direction of rotation counter-clockwise: shift

switch (D) to “L”.

• Direction of rotation clockwise: shift switch (D) to

“R”.

4 Ferm Ferm 37

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din FERM PDM1019 Slagborrmaskin. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar FERM. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din FERM PDM1019 Slagborrmaskin på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för FERM Slagborrmaskiner
Fler bruksanvisningar för Slagborrmaskiner

Vanliga frågor om FERM PDM1019 Slagborrmaskin

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

FERM PDM1026 Slagborrmaskin

Bruksanvisning

FERM PDM1020 Slagborrmaskin

Bruksanvisning

FERM PDM1052 Slagborrmaskin

Bruksanvisning

FERM PDM1007 Slagborrmaskin

Bruksanvisning

FERM PDM1003 Slagborrmaskin

Bruksanvisning

FERM PDM1015 Slagborrmaskin

Bruksanvisning

FERM CDM1079 Slagborrmaskin

Bruksanvisning

FERM PDM1039 Slagborrmaskin

Relaterade kategorier