Bruksanvisning FERM OTM1006 Multiverktyg

Bruksanvisning

EN

4

• Make sure that the maximum speed for the

accessory is larger than or the same as the

maximum speed of the machine. Refer to the

rating plate on the machine.

• Let the machine run at no load in a safe area

after mounting the accessories. If the machine

vibrates strongly, immediately switch off the

machine, remove the mains plug from the

mains, and try to solve the problem.

• Make sure that the workpiece is properly

supported or fixed.

• Wear safety goggles. Wear hearing protection.

Wear a dust mask. If necessary, use other

protective means, such as safety gloves,

safety shoes, etc. Risk of personal injury.

• Keep bystanders away from the work area.

Make sure that all persons in the work area

wear protective equipment. Risk of personal

injury.

• Keep the mains cable away from the rotating

accessory. If the mains cable touches the

rotating accessory, your hands or arms may

come in contact with the accessory. Risk of

personal injury.

• Hold power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring. Cutting accessory contacting

a “live” wire may make exposed metal parts

of the power tool “live” and could give the

operator an electric shock.

• Do not use the machine while carrying it at

your side. Risk of personal injury.

• Do not use the machine near flammable

materials. Risk of fire.

• Beware that the accessory continues to

rotate for a short period after switching off

the machine. Do not attempt to bring the

accessory to a standstill yourself.

• Never put the machine down on a table or a

workbench before it has been switched off.

• Regularly clean the ventilation slots. Risk of

electric shock.

Battery tool use and care

a) Recharge only with the charger specified

by the manufacturer.

A charger that is suitable for one type of

battery pack may create a risk of fire when

used with another battery pack.

b) Use power tools only with specifically

designated battery packs.

Use of any other battery packs may create a

risk of injury and fire.

c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help.

Liquid ejected from the battery may cause

irritation or burns.

Service

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts.

This will ensure that the safety of the power

tool is maintained.

For the charger

Intended use

Charge only CDA1094 type rechargeable battery

packs. Other types of batteries may burst causing

personal injury and damage.

a) The appliance is not to be used by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision

or instruction

b) Children being supervised not to play with

the appliance

c) Do not recharging non-rechargeable

batteries!

d) During charging, batteries must be placed

in the well ventilated area!

Electrical safety

Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din FERM OTM1006 Multiverktyg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar FERM. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din FERM OTM1006 Multiverktyg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för FERM Multiverktyg
Fler bruksanvisningar för Multiverktyg

Vanliga frågor om FERM OTM1006 Multiverktyg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

FERM OTM1004 Multiverktyg

Bruksanvisning

FERM CTM1010 Multiverktyg

Bruksanvisning

FERM CTM1012 Multiverktyg

Bruksanvisning

FERM CTM1032 Multiverktyg

Bruksanvisning

FERM OTM1005 Multiverktyg

Bruksanvisning

FERM CTM1004 Multiverktyg

Bruksanvisning

FERM CTM1009 Multiverktyg

Bruksanvisning

FERM OTM1001 Multiverktyg

Relaterade kategorier