Bruksanvisning FERM LSM1001 Vedklyv

Bruksanvisning

Wear safety boots

Keep bystanders away

Remove plug from mains during maintenance

Danger - Keep hands away from moving parts

Always pay full attention to the movement of the

log pusher

Do not remove jammed logs with your hands

SPECIFIC SAFETY INSTRUCTIONS

• Read and understand the owner's manual and labels

affixed to the log splitter. Learn its application and

limitations as well as the specific potential hazards

peculiar to it.

• Do not operate the log splitter while under the

influence of drugs, alcohol, or any medication that

could affect your ability to use it properly.

• Avoid dangerous conditions:

- Put the log splitter on a 60 - 75cm high, stable, flat,

and level work bench where there is plenty of

room for handling, and helps the operator to stay

alert. Bolt the log splitter to the work surface if it

tends to slip, walk, or slide.

- Keep your work area clean and well lighted.

Cluttered areas invite injuries.

- Do not use the log splitter in wet or damp areas

or expose it to rain.

- Do not use it in areas where fumes from paint,

solvents or flammable liquids pose a potential

hazard.

• Check your log splitter before turning it on. Keep

guards in place and in working order. Form a habit of

checking to see that keys and adjusting wrenches are

removed from tool area before turning it on.

• Do not wear loose clothing, neckties or jewelry

(rings, wrist watches). For long hair, wear hair

protection. Work only with closely fitting clothes.

• Protective electrically non conductive gloves and

non-skid footwear are recommended when

working.

• Protect your eyes and face.

• Any log splitter may throw foreign objects into the

eyes. This can cause permanent eye damage. Always

wear safety goggles.

• Do not put the log splitter on the ground for

operations. This is an awkward operating position:

the operator has to bring his face close to the

machine, and thus risks being struck by wood chips

or debris.

• Keep visitors and children away.

• The log splitter must be operated by one person

only. Other people should keep a safe distance from

the work area. Never use other people to help you

with freeing a jammed log.

• Inspect your log.

• Make sure there are no nails or foreign objects in logs

to be split. The ends of the logs must be cut square.

Branches must be cut off flush with the trunk.

• Do not overreach

- Floor must not be slippery.

- Never stand on the log splitter. Serious injury

could occur if the tool is tipped or if the cutting

tool is unintentionally contacted. Do not store

anything above or near the log splitter where

anyone might stand on the tool to reach them.

• Avoid injury from unexpected incidents

- Always pay full attention to the movement of the

log pusher.

- Do not attempt to load the log on until the log

pusher has stopped.

- Keep hands away from moving parts.

• Protect your hands

- Keep your hands away from splits and cracks

which open in the log. They may close suddenly

and crush or amputate your hands.

- Do not remove jammed logs with your hands.

• Do not force the tool

- Never try to split logs larger than those indicated

in the specifications table. This could be

dangerous and may damage the machine.

- Do not use the log splitter for a purpose for

which it was not intended.

• Never leave the machine running unattended

Do not leave the machine until it has come to a

complete stop.

• Disconnect power

Unplug when not in use, before making adjustments,

changing parts, cleaning, or working on the log

splitter. Consult the manual before servicing.

• Protect the environment

- Take used oil to an authorised collection point or

follow the stipulations from the country where

the log splitter is used.

- Do not discharge into drains, soil or water.

• Make the workshop childproof

- Lock the room.

- Disconnect master switches.

- Store the log splitter away from children and

others not qualified to use it.

ELECTRICAL SAFETY

• Extension cords

Improper use of extension cords may cause

inefficient operation of the log splitter which can

result in overheating. Be sure the extension cord is

no longer than 10m and its section is no less than

2.5mm2 to allow sufficient current flow to the

motor.

Avoid use of free and inadequately insulated

connections. Connections must be made with

protected material suitable for outdoor use.

Avoid electrical shock

Ferm 552 Ferm

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din FERM LSM1001 Vedklyv. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar FERM. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din FERM LSM1001 Vedklyv på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för FERM Vedklyvar
Fler bruksanvisningar för Vedklyvar

Vanliga frågor om FERM LSM1001 Vedklyv

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

AL-KO LSV 560/8 Vedklyv

Bruksanvisning

Faxes TRH700 Vedklyv

Bruksanvisning

Scheppach HL650 Vedklyv

Bruksanvisning

Power Super 50500 Vedklyv

Bruksanvisning

Biltema LS 82 Vedklyv

Bruksanvisning

Faxes ELH500 Vedklyv

Bruksanvisning

Park and Garden LS437 Vedklyv

Bruksanvisning

Bell Loggy V5 Vedklyv

Relaterade kategorier