Bruksanvisning FERM HAM1003 Varmluftpistol

Bruksanvisning

Ferm 03

Electrical safety

When using electric machines always observe

the safety regulations applicable in your country

to reduce the risk of fire, electric shock and per-

sonal injury. Read the following safety instructi-

ons and also the enclosed safety instructions.

Keep these instructions in a safe place!

Always check that the power supply

corresponds to the voltage on the

rating plate.

Class II machine – Double insulation –

You don’t need any earthed plug.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

2

. When using a cable

reel always unwind the reel completely.

3. INSTALLATION

You can work manually with this hot air gun or

you can put it in a vertical position. If you use the

vertical position the metal suspension bracket of

the handgrip must also stand vertical for suppor-

ting the handgrip on the correct place.

4. USING THE APPLIANCE

The hot air gun can be used for:

• Plumbing work like tube connections, solder,

bowing tubes.

• Removing paint, varnish and lacquer without

firerisk.

• Quickly drying of appliances which have beco-

me wet;

• Drying surfaces for quick repairing.

• Removing self-adhesive labels in a clean way.

• placing PVC labels.

• Blistering after sticking PVC materials can be

smoothed after heating.

• Easy removing of vinyl carpeting.

• Forming all synthetics with a low temperature

(300 degrees) among which polyethylene and

PVC.

• Forming all synthetics with a high temperature

(500 degrees) among which acryl and plexi-

glass.

• Smelting synthetics, among which matters

and foils with PVC layer.

• Applying heat shrinking tubes.

• Shrinkwrappers.

• Thawing tubes and engines.

• Repairing finishing layers: email of bath and

household appliances.

• Applying epoxypowder coverlayers.

• Repairing of ski’s, surf-boards and other

sports goods.

• Unscrewing too fast fixed screws and connec-

tions.

Before operating

Before you switch on the hot air gun you have to

search for the right adapter for the mouthpiece

and assemble it on the mouthpiece if it is still

cold.

Replace the mouthpiece only:

• With a stationary engine;

• When the appliance is disconnected;

• When the mouth piece is cold.

Operation

• Check if the mains switch is on position “0”

before you connect the apparatus;

• Keep the power voltage always away from the

hot air stream and the mouth piece;

• Put the mains switch in position “1” or “II” to

let your hot air gun operate:

• “1” = 300 degrees, air flow 340 l/min.

• “0” = Off

• “2” = 500 degrees, air flow 590 l/min.

Tip: If you want to get the best result, test all

appliances on a little part of the workpiece.

5. MAINTENANCE

Always disconnect the apparatus befo-

re carrying out inspection or cleaning.

Never use water or other liquids to

clean the electrical parts of the hot air

gun.

• Never use easy inflammable liquids for clea-

ning the hot air gun, especially for the mouth-

piece.

• Regular maintenance of your hot air gun pre-

GB

50 Ferm

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din FERM HAM1003 Varmluftpistol. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar FERM. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din FERM HAM1003 Varmluftpistol på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för FERM Varmluftpistoler
Fler bruksanvisningar för Varmluftpistoler

Vanliga frågor om FERM HAM1003 Varmluftpistol

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

FERM HAM1004 Varmluftpistol

Bruksanvisning

FERM HAM1008 Varmluftpistol

Bruksanvisning

FERM HAM1017P Varmluftpistol

Bruksanvisning

FERM HAM1014 Varmluftpistol

Bruksanvisning

FERM HAM1011 Varmluftpistol

Bruksanvisning

FERM HAM1013 Varmluftpistol

Bruksanvisning

FERM HAM1015 Varmluftpistol

Bruksanvisning

FERM HAM4002 Varmluftpistol

Relaterade kategorier