Bruksanvisning FERM CSM1003 Cirkelsåg

Bruksanvisning

Ferm 47

EXPLODED VIEW

Circular saw

The following pictograms are used in these instructions

for use:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of

the instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

SAFETY INSTRUCTIONS

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Keep these instructions in a safe place!

BEFORE USING THE CIRCULAR SAW:

1. Check the following points:

- do the voltage of the motor correspond to the

mains voltage (appliances for a mains voltage of

230 V

- are the mains lead and the mains plug in a good

condition: solid, without any loose ends or

damage;

- if the saw blade is missing any teeth, or if it shows

any cracks, it must be replaced immediately.

- Make sure the blade is secure.

- Use this circular saw to saw only wood, wood-like

products.

2. Do not use circular saw blades wich are deformed or

damaged.

3. Do not use HSS blades.

4. Only use blades meeting the required dimensions, as

well as data and descriptions;

Never apply any blades of which the thickness is gre-

ater than that of the riving knife.

5. Do not stop the blade of a circular saw by pressing the

blade from the side.

6. Check that the blade guard can freely move and fully

closes.

7. Never lock-up the guard in the open position.

8. Never put sideward pressure on the blade. This may

cause the blade to break.

9. Be careful when cutting wood with knots, nails or

cracks in it and/or dirt on it, as these can cause the

blade to get stuck.

10. Never leave the circular saw unattended.

11. Use this circular saw to saw only wood or wood-like

products.

USING THE MACHINE:

1. Use clamps or a vice to hold the work.

2. Never remove wood chips and saw dust that is close to

the saw blade with your hands. If there are small pie-

ces of wood left between the fixed and the movable

parts, the circular saw will have to be stopped. Plug

removed from the socket, before any piece left can be

removed.

3. Check that the blade is suitable for the spindle speed

of the circular saw. Do not attempt to cut before the cir-

cular saw has reached full speed. Make sure the circu-

lar saw runs without load (i.e. is not in contact with the

work) when you switch it on. The circular saw must

have reached its full speed first.

4. Never cut wood that is thicker than the depth of the

saw blade.

5. When cutting in wooden walls or floors, check there is

no wiring or piping where you intend to cut.

6. Switch off the tool and wait until the blade has stopped

completely before moving the saw away from the work

or putting it down. Hearing protection should be worn

when using circular saw.

SWITCH OFF THE MACHINE IMMEDIATELY WHEN

YOU DISCOVER:

1. A defective mains plug or mains lead;

2. A defective switch.

3. Overheating of the circular saw.

4. Smoke or odeur caused by scorched insulation.

GB

English

2 Ferm

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din FERM CSM1003 Cirkelsåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar FERM. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din FERM CSM1003 Cirkelsåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för FERM Cirkelsågar
Fler bruksanvisningar för Cirkelsågar

Vanliga frågor om FERM CSM1003 Cirkelsåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

FERM CSM1026 Cirkelsåg

Bruksanvisning

FERM CSM1022 Cirkelsåg

Bruksanvisning

FERM CSM1043 Cirkelsåg

Bruksanvisning

FERM CSM1016 Cirkelsåg

Bruksanvisning

FERM CSM1032 Cirkelsåg

Bruksanvisning

FERM CSM1041P Cirkelsåg

Bruksanvisning

FERM CSM1039 Cirkelsåg

Bruksanvisning

FERM CSM1012 Cirkelsåg

Relaterade kategorier