4
CAPABILITIES
ENGLISH
- Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO ensure self-adhesive pouches are only used with the cold setting.
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT laminate sharp or metal objects (eg: staples, paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot
settings.
DO NOT laminate with self-adhesive pouches on hot settings.
DO NOT laminate an empty pouch.
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
LAMINATOR CONTROLS
A On / off switch
B Pouch selection buttons ( , 80, 125 microns)
C Pouch / document entry slot
D Pouch / document exit
E Release lever ( )
‘Auto Shut-Off’ function
If the machine is not active for 30 minutes, the ‘Sleep Mode’ function will
place the machine into standby mode. To operate the machine, press the
‘Power On’ button on the control panel.
‘Release’ function
To remove or re-align a pouch during lamination, activate the release lever
located at the rear of the machine. The pouch can only be removed from the
entry slot when the lever is activated.
t For best results, use Fellowes
®
brand pouches:
80 - 125 micron + cold pouches.
t For self-adhesive (cold pouches) only use the cold setting.
t This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
t Always put the item to be laminated into the appropriate sized pouch.
t Always test laminate with a similar size and thickness before final process.
t Prepare pouch and item for lamination. Place item within pouch centred and
touching the leading sealed edge. Ensure the pouch is not too large for the
item.
t If required, trim excess material from around the item after lamination and
cooling.
t When working with different pouch thickness’ (temperature settings) it is
recommended to first start with the thinnest pouches.
FEATURES & TIPS
Performance
Format A3/A4
Entry width A3 = 318mm
A4 = 240mm
Pouch thickness (min) 80 microns
Pouch thickness (max) 125 microns
Warm up time (estimate) 3 minutes
Lamination speed (+/- 5%) approx. 300 mm/min (fixed speed)
Number of rollers 2
Ready indication Light
Release lever Yes
Cold lamination Yes
Technical Data
Voltage / Frequency / Current(Amps) A3 = 220-240V AC, 50/60Hz, 3.4A
A4 = 220-240V AC, 50/60Hz, 3.4A
Wattage A3 = 782 Watts
A4 = 782 Watts
Dimensions (HxWxD) A3 = 75 x 435 x 110 mm
A4 = 75 x 342 x 110 mm
Net weight A3 = 1.7 kg
A4 = 1.4 kg
Max document thickness
(laminating capacity) 0.4mm/0.02”
Maximum recommended usage: Moderate Use, 30 laminations per week. Heavier paper materials may have an effect on quoted usage.
Delta i konversationen om denna produkt
Här kan du dela vad du tycker om Fellowes Pixel A3 Lamineringsmaskin. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.