Bruksanvisning EMOS EM170 HD Digitalmottagare

Bruksanvisning

3

SAFETY WARNING:

1. In order for the device to serve long and reliably, do not expose it to extreme temperatures or

high humidity. For instance, never put it in places intended for bathing or within proximity of

heat sources.

2. If the device does not work correctly, please take it to the nearest service centre. Do not attempt

to repair it yourself.

Warning for Use of USB Devices

To fully make use of the USB port, the storage connected to it must support standard

USB 2.0. For awless, stable recording and play, USB devices with writing speed 9.0

MB/s or faster are required. Slower hard drives and ash storage may have problems

with recording which will manifest themselves by image freezing, or may not work at all. Proper func-

tioning can be expected only using drives with one basic partition with le system NTFS or FAT32. If a

dierent le system is present on the drive, format the drive on a PC to the recommended le system

before connecting it to the receiver.

Strongly fragmented or overlled storage devices also may not work properly and smoothly.

External HDDs must have their own power supply, the USB port built into the receiver is not capable of

supplying sucient voltage to power a portable USB drive.

While recording or playing, the USB device must not under any circumstances be disconnected from

the receiver. Disconnection while the receiver is working may cause damage to the receiver or the ash

drive and also damage the data located on the medium.

Standby

The receiver has a function of minimum power consumption in standby mode and is therefore more

friendly to the environment.

Firmware

The control software for this receiver is constantly in development. A new version of the software may

change some functions and operation of the receiver. Images and descriptions in this manual are only

informative in nature. If you notice an error, please inform us. We will do all in our power to correct it.

Receiver Connection and Control Elements:

1.

2.

Front and Rear Panel of the Device

Front Panel

• LED DISPLAY: Shows the number of the currently selected channel

Rear Panel (Fig. 1)

• RF input: Connector for antenna connection

• RF OUT: Output loop for connecting another device

• HDMI: HDTV digital output

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din EMOS EM170 HD Digitalmottagare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar EMOS. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din EMOS EM170 HD Digitalmottagare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för EMOS Digitalmottagare
Fler bruksanvisningar för Digitalmottagare

Vanliga frågor om EMOS EM170 HD Digitalmottagare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

EMOS J6011 Digitalmottagare

Bruksanvisning

Metronic 441827 HD100 Digitalmottagare

Bruksanvisning

GoGEN DVB 168 T2PVR Digitalmottagare

Bruksanvisning

Currys Essentials C1STB11 Digitalmottagare

Bruksanvisning

Logik L5SSTB13 Digitalmottagare

Bruksanvisning

Sharp TU-AS1G Digitalmottagare

Bruksanvisning

Samsung DCB-P853Z Digitalmottagare

Bruksanvisning

Strong SRT 6502 Digitalmottagare

Relaterade kategorier