Bruksanvisning Denver DAB-56C Radio

Bruksanvisning

2. Press and hold one of the Preset button until the display shows 'Preset empty x' (where x is the

preset number)

3. Press ENTER/AUTO-SCAN to store the current chosen frequency.

TO RECALL A PRESET STATION

1. Short press the PRESET button

Note: The unit can store 10 stations for DAB & 10 stations for FM

Note: To use memory 5~8 function, you shall press the shift key first and then press the

PRESET1~4 buttons together.

INFO

The UNIT has DAB information modes which are shown on the bottom line of the display. Short

press the INFO key to see the available types.

1. program type

Displays the type of station content being broadcast e.g. Classic, Pop, News, etc.

2.Ensemble Freq.

Displays the DAB station frequency such as 13F 239.200MHz.

3.Audio Bit Rate

Displays the data rate in kilo Bits per second and the audio mode e.g. Stereo.

4. Ensemble name

Displays the name of the multiplex to which the Digital1 Network current station belongs

5. Signal strength

Displays the signal strength for the station being listened to.

6. Time/Date

Displays current time and date, received off-air.

7. DLS (Dynamic Link Segment)

Scrolling text which includes messages such as Artist and track name, phone numbers,

program details, etc.

FINDING NEW STATIONS

As and when new stations are introduced it will be necessary to do an auto-scan in order to

detect and store the new stations.

1. Short press the Auto-tune button on the rear of the unit to start an auto-scan. ”Autotune Full

Scan” will be displayed

2. DAB services are generally localised, so if you move the UNIT to a different area it will be

necessary to do an auto-scan in order to pick up stations in the new local.

MANUAL TUNE

Manual tuning allows you to tune directly to a DAB station.

1. Long press the ENTER button until the display shows 'Manual Tune'

2. Short press the UP or DOWN key to select a different channel number

Please note: You may have to wait for the UNIT to tune in to the new channel.

OPERATING THE UNIT IN FM MODE

1. Fully extend the telescopic antenna.

2. Press the POWER (ON/OFF) switch to ”ON” position to enter standby mode.

3. Short press the STANDBY button to switch the unit on.

4. If the UNIT is in DAB mode, short press the DAB/F,M to change to FM.

The UNIT remembers the selected source when switched to Standby and automatically selects

it the next time it is switched on. If the power is disconnected the UNIT will always select DAB

mode when first switched on.

5. The display shows the current tuning frequency and information line.

ENG-5

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Denver DAB-56C Radio. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Denver. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Denver DAB-56C Radio på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Denver Radio
Fler bruksanvisningar för Radio

Vanliga frågor om Denver DAB-56C Radio

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Denver DAB-40 Radio

Bruksanvisning

Denver TR-64 Radio

Bruksanvisning

Denver DAB-33 Radio

Bruksanvisning

Denver DAB-38 Radio

Bruksanvisning

Denver TR-61 Radio

Bruksanvisning

Denver DAB-20 Radio

Bruksanvisning

Denver DAB-47 Radio

Bruksanvisning

Denver DAB-42 Radio

Relaterade kategorier