Bruksanvisning Datacol L 220113 Slagborrmaskin

Bruksanvisning

5

English

5. Mounting and dismounting of the bit. (Fig. 1)

(1) Open the chuck jaws, and insert the bit into the

chuck.

To open the chuck jaws, hold the ring while turning

the sleeve in the counterclockwise direction (viewed

from the front side).

(2) Firmly grasp the ring and turn the sleeve in the

clockwise direction. Tighten securely.

(3) To remove the bit, firmly grasp the ring and turn the

sleeve in the counterclockwise direction.

(4) When the sleeve does not become loose any further,

fix the side handle to retaining ring, hold side handle

firmly, then turn the sleeve to loosen by hand. (Fig. 2)

6. Check the rotational direction (Fig. 3)

The bit rotates clockwise (viewed from the rear side)

by pushing the R-side of the push button.

The L-side of the push button is pushed to turn the bit

counterclockwise.

(The

L

and

R

marks are provided on the body.)

CAUTION

Always use the impact drill with clockwise rotation,

when using it as an impact drill.

7. Fixing the side handle (Fig. 4)

Attach the side handle to the mounting part.

Rotate the side handle grip in a clockwise direction

to secure it.

Set the side handle to a position that is suited to the

operation and then securely tighten the side handle

grip.

To attach a depth gauge on the side handle, insert

the gauge into the U-shaped groove on the side

handle, adjust the position of the depth gauge in

accordance with the desired depth of the hole, and

firmly tighten the side handle grip. (Fig. 5)

8. IMPACT to ROTATION changeover (Fig. 6)

Shift the change lever between the right and left

positions to switch easily between IMPACT (rotation

and impact) and ROTATION (rotation only),

respectively.

Voltage 230V

Power input 590W

No load speed 0–2900 min

-1

Drill chuck capacity 13 mm

Steel 13 mm

Concrete 16 mm

Wood 25 mm

Full load impact rate 34500 min

-1

Weight (without cord) 1.5 kg

STANDARD ACCESSORIES

(1) Side Handle ................................................................ 1

(2) Depth Gauge .............................................................. 1

(3) Plastic case ................................................................. 1

Standard accessories are subject to change without

notice.

APPLICATIONS

䡬 By combined actions of ROTATION and IMPACT:

Boring holes in hard materials (concrete, marble,

granite, tiles, etc.)

䡬 By ROTATIONAL action:

Boring holes in metal, wood and plastic.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position. If

the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, inviting serious accident.

3. Extension cord

When the work area is removed from the power

source. Use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

4. Selecting the appropriate drill bit

䡬 When boring concrete or stone

Use an ordinary impact drill bit.

䡬 When boring metal or plastic

Use an ordinary metalworking drill bit.

䡬 When boring wood

Use an ordinary woodworking drill bit.

However, when drilling 6.5 mm or smaller holes, use

a metalworking drill bit.

SPECIFICATIONS

Capacity

IMPACT DRILL SAFETY WARNINGS

1. Wear ear protectors with impact drills.

Exposure to noise can cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

3. Before drilling into walls, ceilings or floors, ensure

that there are no concealed power cables inside.

4. Always use side handle and hold the tool firmly with

both hands.

5. Always use the impact drill with clockwise rotation,

when using it as an impact drill. (Fig. 8)

01Eng_L220113_EngIta 3/10/09, 9:545

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Datacol L 220113 Slagborrmaskin. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Datacol. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Datacol L 220113 Slagborrmaskin på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Datacol Slagborrmaskiner
Fler bruksanvisningar för Slagborrmaskiner

Vanliga frågor om Datacol L 220113 Slagborrmaskin

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Datacol L 220114 Slagborrmaskin

Bruksanvisning

K-Eiko EDH550VRE Slagborrmaskin

Bruksanvisning

FERM PDM1026 Slagborrmaskin

Bruksanvisning

Makita HP2070 Slagborrmaskin

Bruksanvisning

Makita BHP458 Slagborrmaskin

Bruksanvisning

Worx WX369.4 Slagborrmaskin

Bruksanvisning

Parkside IAN 302780 Slagborrmaskin

Bruksanvisning

Narex EVP 13 H-2C Slagborrmaskin

Relaterade kategorier