Bruksanvisning Currys Essentials C15BW10 Blender

Bruksanvisning

NOTE: Do not run the appliance continuously for more than 3 minutes. After a full 3

minute cycle allow the blender to rest for another 5 minutes before using it

again.

During blending, you can feed in small amounts of food or liquid through the jug lid.

To do this:

• Hold the lid.

• Turn the stopper slowly anti-clockwise to free it and then lift it out.

• Gradually feed pieces of food or liquids into the jug through the feeder.

• Fit the stopper back when you have nished.

Stopper/Measuring Cup

Safety Lid

Handle

Blade Assembly

5

6

7

8

Measuring Scale

Blender Jug

Speed Selector

Base Unit

1

2

3

4

1

2

3

4

5

6

7

8

• Do not run the appliance continuously for more than 3 minutes. After a

full 3 minute cycle allow the blender to rest for another 5 minutes before

using it again.

• Never blend very hot liquids in the blender. This is dangerous as the

contents may erupt.

• If you spill liquid on the blender base immediately switch o and wipe

dry.

GB-1 GB-2 GB-3

UNPACKING

Remove all packaging from the blender. Retain the packaging. If you dispose of it

please do so according to any local regulations.

The following items are included:

• The Main Unit

• The Blender Jug (P.N.: XB9178-12)

• The Blender Cover (P.N.: XB9178-10)

• Stopper/ Measuring Cup (P.N.: XB9178-11)

• Instruction Manual (P.N.: XB9178-2)

If items are missing or damaged, please contact Partmaster (UK only).

Tel: 0870 6001 338 for assistance.

PRODUCT OVERVIEW

FIRST TIME USE

• Before using your blender for the rst time, wash the jug, blade assembly, lid and

stopper. Rinse throughly and dry.

• Place the base unit on a stable surface, free from heat and moisture and within easy

reach of a mains socket. The mains cable should not be taut.

PREPARING AND FILLING THE INGREDIENTS

• Cut the ingredients into 25mm (1”) cubes before placing them into the blender jug.

If the food is very solid or dry, cut the pieces into smaller cubes.

• Fill the blender jug with the ingredients.

• Do not overll the jug. The maximum capacity is 1500 ml, but we suggest you do

not exceed 1250 ml. If you are preparing a large quantity use several smaller

batches.

• If the ingredients are very dry, put some liquid into the jug. You should never try to

reduce dry ingredients in the blender.

FITTING THE STOPPER

The stopper has an integral measuring cup useful for measuring small amounts of

ingredients.

• Place the stopper in the slots in the lid and turn clockwise to lock. If the stopper is

properly secured, you will hear a “click” sound.

To avoid splashing, always operate the blender with the stopper rmly in place.

56

7

FITTING THE LID

• Place the lid on the top of the jug and turn the lid clockwise. If the lid is properly

secured, you will hear a “click” sound.

OPERATION

• Make sure the jug and the lid are secure and in the LOCK position.

• Set the selector switch to ‘0’.

• Plug your blender into the mains and switch on the power.

Blender's Operation Modes

• Select the desired operating speed. There are 5

speeds. Move the Speed Selector progressively to

the right to increase the speed. When you start

blending use a low speed to begin with and

gradually increase the speed if necessary.

• To stop the operation, turn the Speed Selector

back to ‘0’.

Use this mode when ingredients need to be

blended in small repeated bursts.

• Turn the Speed Selector to ‘P’ and hold it there for

a short period of time.

• To stop the operation, release the Speed Selector

which will then automatically return to ‘0’.

Continuous (Normal)

operation

Pulsed operation

AFTER USE

After you have nished blending:

• Set the Speed Selector to ‘0’.

• Hold the jug by the handle and carefully turn it clockwise (towards you) to release

the jug. (This may be easier with one hand on the base and one hand holding the

jug handle).

• To pour out the contents, rotate the lid of the jug anticlockwise to free it and then

lift o the lid. Pour or spoon the contents out carefully.

• Unplug the blender from the mains socket.

FITTING THE JUG TO THE BASE UNIT

• Place the jug on the base unit with the arrows as shown below.

• Turn the jug anticlockwise until the arrows line up to lock the jug to the base unit.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Currys Essentials C15BW10 Blender. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Currys Essentials. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Currys Essentials C15BW10 Blender på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Currys Essentials Blenders
Fler bruksanvisningar för Blenders

Vanliga frågor om Currys Essentials C15BW10 Blender

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Currys Essentials C15BW19 Blender

Bruksanvisning

Currys Essentials C12BW11 Blender

Bruksanvisning

SilverCrest IAN 496701 Blender

Bruksanvisning

German Pool PRO-11 Blender

Bruksanvisning

Philco PHTB 2401B Blender

Bruksanvisning

Girmi FR93 Ghiaccio Blender

Bruksanvisning

Schneider SCBL15ACA Blender

Bruksanvisning

German Pool BLD-M25 Blender

Relaterade kategorier