English (original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Type 82B900
Voltage 82V DC
AIR volume 14.5 m³/min
Air speed 200 KM/H
Weight (Without
Battery)
2.7 kg
Battery Pack
82V220G/82V430G
82V220/82V430
Charger 82C1G/82C2/82C6
Sound pressure
level
88 dB(A), k:3.0 dB(A)
Sound power level
100 dB(A)
Vibration level
Ah: 2.5 m/s
2
, k= 1.5 m/s
2
ASSEMBLING THE BLOWER TUBE
WARNING
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from
the tool when assembling parts.
Align either of the grooves (4) in the tube with the
tabs (5) on the blower housing. Push the tube into the
blower housing until the tab engages the grooves.
See Figure 3.
Turn the tube in the direction of the arrow until
both of the tabs slide into the lock positions.
See Figure 4.
TO REMOVE/INSTALL BATTERY PACK
See Figure 5.
TO REMOVE BATTERY PACK
Press and hold the battery release button with firm
grip.
Grasp the trigger handle firmly. Pull the battery pack
out of the handle.
IMPORTANT! The battery pack is not charged when it
place the battery pack in the battery charger and charge.
Make sure to read all safety precautions, and follow the
instructions in the Battery Charger manual.
TO INSTALL BATTERY PACK
Align the tongue of the battery pack with the cavity in
the handle housing.
Grasp the trigger handle firmly.
Insert the battery into the battery opening until the
battery release button (3) locks into place.
Push the battery pack into the handle until both sides
lock. The latch button will click when locked into place.
Do not use force when inserting the battery pack. It
should slide into place and click.
WARNING
Follow these instructions in order to avoid injury and to
• Replace the battery pack or the charger immediately
if the battery case or charger cord is damaged.
• Verify that the switch is in the OFF position before
inserting or removing the battery pack.
• Verify that the battery pack is removed and the switch
is in the OFF position before inspecting, adjusting, or
performing maintenance on any part of the blower.
• Read, understand, and follow the instructions
contained in the section entitled Charging Procedure.
DESCRIPTION
See Figure 1.
1. BLOWER TUBE
2. TRIGGER
3. BATTERY RELEASE BUTTON
ASSEMBLY
UNPACKING
Carefully remove the product and any accessories
from the box.
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call your
Cramer service centre for assistance.
PACKING LIST
See Figure 2.
Blower Tube
Blower
Operator’s Manual
WARNING
Do not use this product if any parts on the Packing
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
1
Double-insulated
construction.
Delta i konversationen om denna produkt
Här kan du dela vad du tycker om Cramer 82B900 Lövblåsare. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.