Bruksanvisning Cosatto Story Spjälsäng

Behöver du en bruksanvisning för din Cosatto Story Spjälsäng? Nedan kan du se och ladda ner PDF-bruksanvisningen gratis på svenska. Den här produkten har för närvarande 1 vanliga frågor, 0 kommentarer och har 0 röster. Om det här inte är bruksanvisningen du vill ha, vänligen kontakta oss.

Är produkten defekt och erbjuder bruksanvisningen ingen lösning? Gå till ett Repair Café för gratis reparationstjänster.

Bruksanvisning

Loading…

2 - attaching the cot sides
Note: When fitted, the printed on the bottom of the cot sides (4) should face
outwards.
Whilst the cot is still on its side, attach one of the cot sides (
4) by passing four long bolts (A)
through the drilled holes in the cot side into the cot ends.
Attach the remaining cot side by following the same process.
To complete the construction process, tighten ALL bolts and carefully turn the cot upright.
3 - constructing the sofa
To construct the sofa follow the same procedure for constructing the cot leaving off the second cot
side.
If the cot bed has already been constructed, loosen all the bolts. Remove one of the cot sides then
retighten ALL bolts.
NOTE: Only the two lower mattress base positions should be used in the Sofa mode.
IMPORTANT: If the sofa is converted into a junior bed or subsequently converted
back into a cot (for a second child for example), the security screws MUST be
re-fitted.
4 - constructing the junior bed
To turn the cot into a junior bed you must first fully dismantle the cot, being careful to store the
cot head end and other parts in a safe, dry place as these may be required again.
When fully dismantled, remove the security screws from the bottom section of the cot foot end (
1)
and separate the two parts. Store the bottom section in a safe dry place.
Insert the feet (
F) to the outer holes in the bottom of the separated foot end.
Using Allen key (
G) fit four long bolts (A) and the four “D” washers (B) in the slots in the
mattress base and into the cot foot end and junior bed head end (
5). Fit the four small bolts (D)
through the brackets and into the cot ends.
IMPORTANT: If the junior bed is converted into a sofa or subsequently converted
back into a cot (for a second child for example), the security screws MUST be
re-fitted.
5 - assembling the drawer 1
Screw the six camlock pins (J) to the back of the drawer front (11).
Fit the drawer sides (
6 & 7) and the drawer divider (8) to the drawer back panel (9) using long
screws (
H).
Slide the drawer base panels (
10) into the slots in the sides, divider and back.
Fit the drawer front (
11) ensuring the camlock pins locate into the holes in the sides and divider and
the base panels fit into the slot in the back of the drawer front. Secure the drawer front by
fitting the six camlocks (
K) into the holes and over the ends of the camlock pins. Turn the camlocks
in a clockwise direction until they lock in place.
6 - assembling the drawer 2
Fit the handles (12) to the front of the drawer using drawer bolts (M).
Turn the drawer over and fit the drawer wheels (13) to the bottom of the draw sides, one in each
corner, with short screws (L).
Slide the drawer under the cot.
7 - fitting a mattress (mattress not supplied)
There are marks on the cot to show the highest and lowest positions of the mattress (A & B). The
thickness of the mattress used shall be such that the internal height (surface of the mattress to the
upper edge of the cot frame) is at least 200mm in the highest position of the mattress base (A) and
at least 500mm in the lowest position of the mattress base (B).
Ladda ner bruksanvisning i Engelska (PDF, 1.83 MB)
(Tänk på miljön och skriv endast ut denna bruksanvisning om det verkligen är nödvändigt)

Loading…

Betyg

Berätta vad du tycker om Cosatto Story Spjälsäng genom att betygsätta den. Vill du dela med dig av dina åsikter om denna produkt eller ställa en fråga? Lämna en kommentar nederst på sidan.
Är du nöjd med Cosatto Story Spjälsäng?
Ja Nej
Bli den första personen som betygsätter denna produkt
0 röster

Delta i konversationen om denna produkt

Här kan du dela vad du tycker om Cosatto Story Spjälsäng. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Cosatto Story Spjälsäng. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Cosatto. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Cosatto Story Spjälsäng på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Märke Cosatto
Modell Story
Kategori Spjälsängar
Filtyp PDF
Filstorlek 1.83 MB

Alla bruksanvisningar för Cosatto Spjälsängar
Fler bruksanvisningar för Spjälsängar

Vanliga frågor om Cosatto Story Spjälsäng

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Upp till vilken ålder kan mitt barn stanna i barnsäng? Verifierad

Detta beror på hur långt barnet är. Spjälsängen är tillräckligt stor om det fortfarande finns 20 cm utrymme på längden.

Detta hjälpte (533) Läs mer
Bruksanvisning Cosatto Story Spjälsäng

Relaterade produkter

Relaterade kategorier

×
Download