Bruksanvisning Clas Ohlson IW003 Väderstation

Behöver du en bruksanvisning för din Clas Ohlson IW003 Väderstation? Nedan kan du se och ladda ner PDF-bruksanvisningen gratis på svenska. Den här produkten har för närvarande 5 vanliga frågor, 4 kommentarer och har 7 röster med ett genomsnittligt produktbetyg på 14/100. Om det här inte är bruksanvisningen du vill ha, vänligen kontakta oss.

Är produkten defekt och erbjuder bruksanvisningen ingen lösning? Gå till ett Repair Café för gratis reparationstjänster.

Bruksanvisning

Loading…

English
GREAT BRITAIN
for consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Ver. 201006
Set time and date
1. Press and hold SET / ALM SET for ca.
2seconds. The year flashes and the symbol “Yr”
appears. Press + and – to insert year.
2. Press SET/ALM SET: the month flashes on the
display. Press + and – to insert month.
3. Press SET/ALM SET: the computer network
flashes. Press + and – to set date.
4. Press SET/ALM SET: “00” flashes. Press +
and – to set time or to set time zone (see
section World time).
“00” = Local time.
“01” = +1 h from local time.
“-01” = -1 h from local time.
5. Press SET/ALM SET: “24hr” flashes. Press + or –
to select 12- or 24-hour clock display.
6. Press SET/ALM SET: time flashes. Press + or –
to set time.
7. Press SET/ALM SET: minute flashes. Press + or
– to set minutes.
8. Press SET/ALM SET: again or wait ca 10
seconds to return to normal conditions.
Using your weather station
Using alarm
Set alarm time
The world station has dual alarm time, A1 and A2,
which can be set separately.
1. Press SET/ALM SET once. The alarm time and
”A1” appear on the display (to set alarm time 2,
press SET/ALM SET again until ”A2” appears
and then continue to step 2).
2. Press and hold SET/ALM for ca. 2 seconds until
the time flashes. Press + or – to set the hour.
3. Press SET/ALM SET: the minute display flashes.
Press + or – to set minute.
4. Press SET/ALM SET again: the symbol for days
flashes. Press + or – to select the days the alarm
should sound.
MON, TUE, WED, THU, FRI, SAT, SUN –
Alarm every day
MON, TUE, WED, THU, FRI – Alarm only
Monday to Friday.
SAT, SUN – Alarm only Saturday and Sunday.
5. Press SET/ALM SET again or wait ca 10
seconds to return normal situation.
Activate the alarm
Press ALM ON-OFF one or more times to activate
or shut off Alarm 1 and Alarm 2. A symbol appears
when one or the other alarm is activated.
1 = Alarm 1
2 = Alarm 2
Shutting off alarm/Repeated waking
1. When the alarm time comes the alarm sounds at
the same time as the alarm symbol flashes.
2. Press the top edge of the weather station
(SNOOZE/LIGHT) to shut off the alarm temporarily
(repeated waking). The alarm symbol continues to
flash and the alarm sounds again after 5 minutes.
3. To shut off the alarm permanently press ALM
ON-OFF once. The alarm symbol stops flashing
and begins to glow steadily; the alarm is now set
to sound again the next day.
Using the backlight
The display’s backlighting is turned on by pressing
the top edge of the weather station. The lighting
goes off automatically after a few seconds.
Changing the temperature unit (°C/°F)
Press – (°C/°F) to change the temperature unit.
World time
1. If a world time (secondary time) is given it can be
displayed by pressing and holding MEM/DUAL
TIME for ca 2 seconds. The secondary time
appears and the symbol DUAL TIME lights up.
2. Press MEM/DUAL TIME again and hold to return to
local time. The symbol DUAL TIME is extinguished.
Weather forecasting and trend
The weather station can sense variations in atmos-
pheric pressure and hence is able to forecast the
weather 12-24 hours ahead within a radius of
30-50 km from the receiver.
Trend
When
appears the atmospheric pressure is
rising and the weather is expected to improve.
When
appears the atmospheric pressure is
falling and the weather is expected to take a turn
for the worse.
When
appears variations in atmospheric
pressure are stable.
Atmospheric pressure history
The curve shows the atmospheric pressure trend
over the past 12 hours.
Notes:
When the weather station has been newly installed
you should disregard its weather forecasts for the
first 12-24 hours as it needs some time in a new
location before it can give reliable forecasts.
Absolute precision cannot be guaranteed. The
weather forecasting function has a reliability of
75% because it has been designed for use in
many different types of environment.
If the weather station is moved to a location
with a notably different height above sea level
compared to its original location, remove the
batteries and re-insert them after ca. 20 seconds.
Doing this prevents the weather station from
sensing differences in the atmospheric pressure
and thereby giving a wrong forecast. Disregard
weather forecasts the first 24 hours after changing
batteries. By doing this the weather station is not
tricked into sensing difference in pressure and
thus give an incorrect forecast.
Temperature and humidity trend
The trend arrows appear to the right of the tempera-
ture and humidity readings.
Appears when the most recent temperature or
humidity measurements are 1 °C or 5 % higher than
the preceding temperature or humidity readings.
Appears when the most recent temperature or
humidity measurements are 1 °C or 5 % lower than
the preceding temperature or humidity readings.
Appears when the most recent temperature or
humidity measurements are within +/- 1 °C or +/- 5 %
of the preceding temperature or humidity readings.
Reading max. and min. temperatures
1. Press MEM/DUAL TIME to read the highest
temperature, humidity and pressure readings.
“MAX” appears in the display.
2. Press MEM/DUAL TIME again to read the lowest
temperature, humidity and pressure readings.
“MIN” appears in the display.
Resetting max. and min.
When the max. - and min. temperature appear press
and hold MEM/DUAL TIME to reset the highest and
lowest temperature readings.
Care and maintenance
Wipe off the device with a dry rag. Never use
solvents or abrasive cleaning agents.
Troubleshooting
The display
is blank.
• Press once the RESET button at
the back of the receiver.
• Check and replace the
receiver batteries.
The tempe-
rature and
humidity
from the out-
door sensors
do not ap-
pear on the
display.
• Check that the correct channel
is set on the receiver. Press +/
CHANNEL one or more times
to select the channel.
• Check and replace the
sensor batteries.
• Try moving the sensor and
receiver closer to one another.
The receiver and the sensor must be
synchronised anew.
1. Press +/CHANNEL on the
receiver to select the desired
channel for the sensor.
2. Press and hold +/CHANNEL on
the receiver to start the search.
3. Next press RESET on the sensor.
4. When the sensor’s temperature
appears on the display
synchronisation has succeeded.
Temperature,
humidity or
pressure is
incorrect.
• Press once the RESET on the
back of the receiver.
• Check that the sensor or receiver
are not exposed to external heat
sources or cooling units.
Recycling
Make sure you comply with local regulations when
discarding the device. If you are not sure what to do,
contact your local authorities.
Sun
Shifting
cloudiness
Overcast
Rain clouds Thunder
showers
Frost warning
Ladda ner bruksanvisning i Svenska (PDF, 5.67 MB)
(Tänk på miljön och skriv endast ut denna bruksanvisning om det verkligen är nödvändigt)

Loading…

Betyg

Berätta vad du tycker om Clas Ohlson IW003 Väderstation genom att betygsätta den. Vill du dela med dig av dina åsikter om denna produkt eller ställa en fråga? Lämna en kommentar nederst på sidan.
Är du nöjd med Clas Ohlson IW003 Väderstation?
Ja Nej
14%
86%
7 röster

Delta i konversationen om denna produkt

Här kan du dela vad du tycker om Clas Ohlson IW003 Väderstation. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.

Cecilia 16-11-2019
Helt plötsligt har min väderstation börjat pipa var 5 minut och det är inte larmet. Det kommer fram ett tecken i vänstra hörnet då den piper. Har resetat men det hjälper inte.

svara | Detta hjälpte (74) Läs mer
Eva Lindell 06-12-2020
Öppna väderstationen försikt så att kablarna inte lossar. Bryt försiktigt loss den runda svarta ljudgivaren. Kasta. Montera ihop väderstationen igen. Du kan inte ha larmfunktion nu men för övrigt fungerar den!

Detta hjälpte (16)
Åsa R 09-04-2021
Det hände oss oxå nu efter många år. Jag tog ut batterierna ur både väderstation och sändare och lät dem vara strömlösa över natten. När jag kopplade ihop dem igen på morgonen så var pipljudet borta :)

Detta hjälpte (3)
Lena 19-12-2021
Hej fått en väderstation cortex 36-6832. Den piper med jämna mellanrum ungefär 45 sek till 1minut intervall hur får jag bort det ljudet?

svara | Detta hjälpte (13)

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Clas Ohlson IW003 Väderstation. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Clas Ohlson. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Clas Ohlson IW003 Väderstation på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Märke Clas Ohlson
Modell IW003
Kategori Väderstationer
Filtyp PDF
Filstorlek 5.67 MB

Alla bruksanvisningar för Clas Ohlson Väderstationer
Fler bruksanvisningar för Väderstationer

Vanliga frågor om Clas Ohlson IW003 Väderstation

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Enligt min väderstation var prognosen att det skulle regna, men det hände inte. Vad beror det på? Verifierad

Väderstationens prognos baseras på lufttrycket. Generellt betyder lågtryck dåligt väder och högtryck bra väder. Det är möjligt att vädermönstret utvecklas annorlunda än vad lufttrycket förutspår.

Detta hjälpte (1404) Läs mer

Vad är den bästa platsen för en väderstation och dess sensorer? Verifierad

Själva väderstationen är placerad inuti och måste hållas borta från värmekällor som kök, fönster eller elektriska apparater. En separat yttemperaturgivare måste placeras i skugga och minst 1,25 m över marken. En regnsensor måste placeras i ett öppet område där det alltid kan samla regn. En vindsensor måste också placeras i ett öppet område med eventuella hinder som påverkar vinden.

Detta hjälpte (334) Läs mer

Min väderstation har en regnmätare, kan den också mäta mängden snöfall? Verifierad

Vissa regnmätare är utrustade med ett värmeelement som gör att snön smälter och låter den mätas. Utan värmeelement tätas regnmätaren och ingen mätning kan utföras.

Detta hjälpte (235) Läs mer

Ett batteri i min enhet är oxiderat, kan jag fortfarande använda det säkert? Verifierad

Ja, enheten kan fortfarande användas säkert. Ta först bort det oxiderade batteriet. Använd aldrig bara händer för att göra detta. Rengör sedan batterifacket med en bomullspinne doppad i ättika eller citronsaft. Låt det torka och sätt i nya batterier.

Detta hjälpte (234) Läs mer

Kan jag lämna ett utbytbart batteri i en enhet under lång tid? Verifierad

Utbytbara batterier kan stanna kvar i en enhet under lång tid om enheten används. När en enhet lagras under lång tid är det lämpligt att ta bort batterierna för att förhindra oxidation.

Detta hjälpte (234) Läs mer
Bruksanvisning Clas Ohlson IW003 Väderstation

Relaterade produkter

Relaterade kategorier