Bruksanvisning Chef'sChoice 480KS Knivslip

Bruksanvisning

Figure 4: Sharpening in Stage 2.Figure 3: Sharpening in Stage 1.

KNIFE SHARPENING

The Chef’sChoice

®

480 KS Knife and Scissors Sharpener is equipped with a

2-stage knife sharpening section with built-in angle guides that take the guess-

work out of sharpening and 100% diamond abrasives that sharpen quickly and

efficiently! Knives are sharpened first with medium diamond abrasives in Stage 1

then with fine diamond abrasives in Stage 2. The sharpening angle in both stages

is precisely controlled by roller angle guides (Fig. 2).

First, familiarize yourself with the parts of the sharpener (Fig. 2). Always start

with a clean knife. Place the sharpener on a flat surface, near the edge of a

table or other secure work surface. Hold the sharpener with fingers safely behind

the Guard Rib and place the blade in Stage 1: the slot nearest to the Guard Rib

(Fig. 3). Make sure the blade leans firmly against the roller guides. Without any

downward pressure, move the blade back and forth in the Stage 1 slot until the

blade is sharp. Keep your eyes on the roller guides; one or both should turn as you

pull the knife back and forth to ensure the knife is at the correct angle. Both sides

of the edge will be sharpened at the same time.

Next, place the knife in the Stage 2 slot, (Figure 4) making sure the blade leans

firmly against the roller guides and repeat the back and forth movement to refine

and further sharpen the edge. Usually, only 25 back-and-forth strokes are needed

in Stage 1 and about 5 back-and forth strokes in Stage 2. It is important to keep

the blade in contact with the knife roller guides at all times and apply little to

no downward pressure on the blade. If the knife is not sharp enough, repeat the

steps described above for both Stages

1 and 2.

SUGGESTIONS: If you’re right-handed,

hold the handle in the left hand and the

knife in the right. If left-handed, reverse

hands. Just remember to start sharpen-

ing in the slot nearest the handle (Stage

1). You won’t need any sharpening oils,

lubricants, water or other liquids. Stage

Figure 2: Knife sharpener parts.

Magnetic Holder

Guard Rib Roller Angle

Guides

Stage 2

(Fine)

Stage 1

(Medium)

Knife

Sharpening

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Chef'sChoice 480KS Knivslip. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar ChefsChoice. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Chef'sChoice 480KS Knivslip på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Chef'sChoice Knivslipar
Fler bruksanvisningar för Knivslipar

Vanliga frågor om Chef'sChoice 480KS Knivslip

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Chef'sChoice FlexHone 320 Knivslip

Bruksanvisning

Chef'sChoice SteelPro 470 Knivslip

Bruksanvisning

Chef'sChoice Station 130 Knivslip

Bruksanvisning

Chef'sChoice 220 Hybrid Diamond Hone Knivslip

Bruksanvisning

Chef'sChoice Manual 440 Knivslip

Bruksanvisning

Chef'sChoice Pronto 464 Knivslip

Bruksanvisning

Chef'sChoice Asian 316 Knivslip

Bruksanvisning

Chef'sChoice Manual 450 Knivslip

Relaterade kategorier