Bruksanvisning Casio G-Shock G-7710-1ER Armbandsur

Bruksanvisning

4

Operation Guide 3095

End time

Start time

To configure Hourly Time Signal settings

1. In the Alarm Mode, use D to display the Hourly Time

Signal (SIG) screen.

2. Hold down A until the Hourly Time Signal start time

starts to flash. This is the setting screen.

• This also will turn on the Hourly Time Signal.

3. Press C to move the flashing in the sequence shown

below to select other settings.

Start Time

(from)

End Time

(to)

Repeat Pattern

(REP)

4. While a setting is flashing, use D (+) and B (–) to

change it.

• When the start time and end time settings specify a

period that is 24 hours long (such as a start time of

7:00 a.m. and an end time of 6:00 a.m.), ALL is

displayed for both the start time and the end time.

• You can select any one of the three Hourly Time Signal repeat patterns described

below.

Hourly time signal

on indicator

On/Off status

5. Press A to exit the setting screen.

• With the 12-hour format, set the time correctly as a.m. (A). or p.m.(P).

To turn the Hourly Time Signal on or off

1. In the Alarm Mode, use D to display the Hourly Time

Signal (SIG) screen.

2. Press B to toggle the Hourly Time Signal on (on) and

off (OFF).

• An Hourly Time Signal on indicator is on the Alarm

Mode Hourly Time Signal screen while the Hourly Time

Signal is on.

• The Hourly Time Signal on indicator is on the display in

all modes while the Hourly Time Signal is turned on.

To configure the Hourly Time Signal to sound:

Daily

Daily on Saturday and Sunday

Daily from Monday through Friday

Select this setting:

DAILY

wEND

wDAY

DST indicator

Timekeeping

Mode time

World Time

World Time City code

Dual Time

Dual Time City code

World Time

World Time shows the current time in 48 cities (28 time

zones) around the world.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

To view the time for another city code

In the World Time Mode, press D to scroll eastward

through city codes or B to scroll westward.

• For full information about city codes, see the “City Code

Table”.

• If the current time for a city is wrong, check your

Timekeeping Mode time and Home City code settings

and make necessary changes.

• You can change your Home City code in the

Timekeeping Mode. For more information, see “To set

the time and date”.

• You also can change your Dual Time City code in the Timekeeping Mode. For more

information, see “To change the Dual Time City code”.

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D and B to display the

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

2. Hold down A for about one second to toggle between

Daylight Saving Time (DST displayed) and Standard

Time (DST not displayed).

• The DST indicator is on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

• Note that the DST/Standard Time setting affects only the

currently displayed city code. Other city codes are not

affected.

• You can use this operation to toggle the DST/Standard

Time setting for the city code selected for your Dual

Time City.

Parallel to ground More than 40

°

Auto light switch

indicator

Illumination

This watch has an EL (electro-luminescent) panel that

causes the entire display to glow for easy reading in the

dark. The watch’s auto light switch turns on illumination

automatically when you angle the watch for reading

towards your face.

• The auto light switch must be turned on (indicated by

the auto light switch indicator) for it to operate.

• See “Illumination Precautions” for more important

information.

To illuminate the display manually

In any mode, press L to turn on illumination for about

one second.

• The above operation turns on illumination regardless of

the current auto light switch setting.

About the Auto Light Switch

While the auto light switch is enabled, illumination turns on whenever you position

your wrist as described below in any mode.

Moving the watch to a position that is parallel to the ground and then tilting it

towards you more than 40 degrees causes illumination to turn on.

• Wear the watch on the outside of your wrist.

Warning!

••

••

• Always make sure you are in a safe place whenever you are reading the watch

using the auto light switch. Be especially careful when running or engaged in

any other activity that can result in accident or injury. Also take care that

sudden illumination by the auto light switch does not startle or distract others

around you.

••

••

• When you are wearing the watch, make sure that its auto light switch is turned

off before riding a bicycle or operating a motorcycle or any other motor

vehicle. Sudden and unintended operation of the auto light switch can create

a distraction, which can result in a traffic accident and serious personal injury.

To turn the auto light switch on and off

In the Timekeeping Mode, hold down L for about three seconds to toggle the auto

light switch on (auto light switch indicator displayed) or off (auto light switch indicator

not displayed).

• The auto light switch indicator is on the display in all modes while the auto light

switch is turned on.

• In order to protect against running down the battery, the auto light switch turns off

automatically approximately six hours after you turn it on.

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto Display

Auto Display cycles automatically through the screen of

each mode.

To turn off Auto Display

Press A or C.

To turn on Auto Display

In the Timekeeping Mode, hold down B and D for about

two seconds.

• Note that Auto Display cannot be turned on while a

setting screen is on the display.

Graphic Area

The graphic area indicates different types of data,

depending on the mode you are in, as described below.

Graphic area

Flash Alert

When Flash Alert is on, the red and green LEDs under the

display will flash in time with stopwatch Auto Start, the

countdown alarm, alarms, and the Hourly Time Signal.

To turn Flash Alert on and off

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C ten times to display the Flash Alert setting screen.

3. Press D to toggle Flash Alert on (SYNC displayed) and off (OFF displayed).

4. Press A twice to exit the setting screen.

• The Flash Alert setting you select with the above procedure is applied in all modes.

• You also can use the above procedure to check the current Flash Alert on/off setting.

To test Flash Alert

In the Timekeeping Mode, hold down B to cause the red and green LEDs to flash

alternately.

Contrast Adjustment

You can adjust the contrast of the watch to make its display figures darker or lighter.

To adjust contrast

1. In the Timekeeping Mode, hold down A until the seconds start to flash, which

indicates the setting screen.

2. Press C 11 times to display the contrast adjustment (CNT) screen.

3. Use D (+) and B (–) to scroll through the available display format numbers

(1 through 7).

4. Press A twice to exit the setting screen.

Button Operation Tone

The button operation tone sounds any time you press one of the watch’s buttons. You

can turn the button operation tone on or off as desired.

• Even if you turn off the button operation tone, the alarms, the Hourly Time Signal,

the countdown alarm, and stopwatch Auto Start all operate normally.

Mode

Timekeeping

Stopwatch

(Elapsed Time Screen)

Stopwatch

(Lap Time Screen)

Recall

Countdown Timer

Alarm

World Time

Graphic Area

Timekeeping Mode seconds

Stopwatch elapsed time

seconds

Stopwatch lap time seconds

Elapsed time seconds

Countdown time seconds

Timekeeping Mode seconds

Timekeeping Mode seconds

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Casio G-Shock G-7710-1ER Armbandsur. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Casio. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Casio G-Shock G-7710-1ER Armbandsur på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Casio Armbandsur
Fler bruksanvisningar för Armbandsur

Vanliga frågor om Casio G-Shock G-7710-1ER Armbandsur

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Casio Edifice EFS-S590AT-1AER Armbandsur

Bruksanvisning

Casio G-Shock DWE-5600KS-7ER Armbandsur

Bruksanvisning

Casio G-Shock GMW-B5000TR-9ER Armbandsur

Bruksanvisning

Casio Collection WS-1200H-3AVEF Armbandsur

Bruksanvisning

Casio Pro Trek PRG-240-3ER Armbandsur

Bruksanvisning

Casio G-Shock GBD-100-1ER Armbandsur

Bruksanvisning

Casio G-Shock GA-2000WM-1AER Armbandsur

Bruksanvisning

Casio Edifice ECB-10AT-1AER Armbandsur

Relaterade kategorier