Bruksanvisning Casio Collection AE-1300WH-4AVEF Armbandsur

Bruksanvisning

Operation Guide 3426

E-10

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

 With the 12-hour format, the P (PM) indicator appears for times in the range of noon

to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the

range of midnight to 11:59 a.m.

 With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

 The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

 The P indicator is not displayed with the Timekeeping Mode time on the Preset

Timer Mode, Countdown Timer Mode, World Time Mode, and Alarm Mode screens.

E-11

Stopwatch

The stopwatch lets you measure elapsed time. The upper

display and lower display can be used for offi cial timing of

an event or game.

 The measurement range of the upper display is

59 minutes 59 seconds.

 The measurement range of the lower display is

99 minutes 59 seconds.

 The stopwatch continues to run, restarting from zero after

it reaches its limit, until you stop it.

 The stopwatch measurement operation continues even if

you exit the Stopwatch Mode.

 All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing C

(page E-4).

Timekeeping Mode time

Initial Stopwatch Mode

Screen

E-12

 This time measurement (1/100 second)

cannot be paused.

Elapsed Time Screen

Minutes Seconds

 Press D to pause and

resume elapsed time

measurement.

Minutes Seconds

 This time measurement

cannot be paused.

It shows the total elapsed

time since the timing

operation started.

To measure times with the stopwatch

Elapsed Time

D D D D

Hold down A

Start Stop*

1

Resume Stop*

1

Reset

*1 Elapsed time measurement in the lower display continues.

E-13

Using the Watch for Offi cial Timing of a Sport Event

After you set a game or event time, the watch will sound an alarm when the time in

the lower display reaches that time.

If the event is interrupted for some reason, you can press D to pause and resume

timing in the upper display. The lower display shows the total elapsed time since the

start of the timing operation. You can calculate the total amount of time that play was

interrupted (lost time or injury time) by subtracting the upper display time from the

lower display time.

E-14

To set the event time

1. In the Stopwatch Mode, hold down A until the current

event time setting starts to fl ash in the lower display.

This is the setting screen.

 If the current event time is not displayed, use the

procedure under “To reset elapsed time measurement

to zero” (page E-15) to display it.

2. While a setting is fl ashing, use D (+) and B (–) to

change it.

 You can set the event time in the range of 1 minute to

60 minutes, in 1-minute units.

 “

” indicates there is no event time set.

3. Press A to exit the setting screen.

To start timing at the beginning of an event

When the current time in the lower display reaches the event start time, press D to

start timing.

 This will display elapsed time measurement in the upper and lower displays.

E-15

To pause timing

1. Press D.

This stops elapsed time measurement in the upper display.

 Elapsed time measurement in the lower display continues.

2. To resume elapsed time measurement in the upper display, press D again.

When the preset event time is reached

 The watch will sound an alarm when the elapsed time measurement in the lower

display (total elapsed time since timing started) reaches the preset event time.

 Elapsed time measurement continues to be performed even after the preset event

time is reached.

To reset elapsed time measurement to zero

1. Press D. This stops elapsed time measurement in the upper display.

 Elapsed time measurement in the lower display continues.

2. Hold down A until the initial Stopwatch Mode screen appears.

E-16

Preset Timer

The watch includes a number of different preset times that

you can select for the countdown start time.

An alarm sounds when the countdown reaches zero.

 The following are the preset start times, all in minutes:

10, 12, 15, 20, 25, 30, 35, 40, 45.

 You can also select auto-repeat, which automatically

restarts from the preset start time you selected, whenever

zero is reached.

 All of the operations in this section are performed in the

Preset Timer Mode, which you enter by pressing C

(page E-4).

Preset timer time

Timekeeping Mode time

E-17

To perform a preset timer operation

1. In the Preset Timer Mode, use A to scroll through the

preset times until the one you want to use is displayed.

10 minutes 12 minutes 15 minutes 20 minutes

A A A

A

A

25 minutes

45 minutes 40 minutes 35 minutes 30 minutes

A A A

A

E-18

 To turn on auto-repeat, hold down A while a start time

selection screen is displayed. The number of repeats

will appear in the lower display.

 Frequent use of auto-repeat and the alarm can run

down battery power.

2. Press D to start the countdown timer.

 Press D while a countdown operation is in progress to

pause it. Press D again to resume the countdown.

Number of repeats

Auto-repeat on indicator

E-19

 When the end of the countdown is reached, the alarm sounds for 10 seconds or until

you stop it by pressing any button.

 When the end of the countdown is reached while auto-repeat is turned off, the watch

will go into an elapsed time operation and display how much time has elapsed

since the end of the countdown was reached. The elapsed time operation will stop

automatically when it reaches 60 minutes. At that time the countdown timer start

time selection screen will appear.

 When the end of the countdown is reached while auto-repeat is turned on, a new

countdown starts from the selected preset start time. The number of repeats is

displayed in the lower display. The number of repeats display changes to “

” when

the count reaches 100.

 To stop a countdown operation completely, fi rst pause it (by pressing D), and then

press A. This will display the initial Preset Timer Mode screen.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Casio Collection AE-1300WH-4AVEF Armbandsur. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Casio. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Casio Collection AE-1300WH-4AVEF Armbandsur på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Casio Armbandsur
Fler bruksanvisningar för Armbandsur

Vanliga frågor om Casio Collection AE-1300WH-4AVEF Armbandsur

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Casio G-Shock GST-B300B-1AER Armbandsur

Bruksanvisning

Casio G-Shock G-8900GB-1ER Armbandsur

Bruksanvisning

Casio Pro Trek PRT-B70-1ER Armbandsur

Bruksanvisning

Casio Edifice EFR-S572D-1AVUEF Armbandsur

Bruksanvisning

Casio Collection W-218H-8AVEF Armbandsur

Bruksanvisning

Casio G-Shock GA-2000WM-1AER Armbandsur

Bruksanvisning

Casio G-Shock DW-5600BBOCT-1ER Armbandsur

Bruksanvisning

Casio G-Shock GA-900-2AER Armbandsur

Relaterade kategorier