Bruksanvisning Casio Baby-G BGA-260-7AER Armbandsur

Bruksanvisning

Operation Guide 5628

E-39

Specifications

Accuracy at normal temperature:

±

30 seconds a month

Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week

Time format: 12-hour and 24-hour

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2039

Other: 4 screen formats (Day of the Week, Month - Day, Hour : Minutes,

Seconds); Home City code (can be assigned one of 31 city codes);

Standard Time/Daylight Saving Time (summer time)

Analog Timekeeping: Hour, minutes (hand moves every 20 seconds)

World Time: 27 cities (29 time zones)

Other: Daylight Saving Time/Standard Time

Countdown Timer:

Measuring unit: 1 second

Countdown range: 60 minutes

Countdown start time setting range: 1 to 60 minutes (1-minute increments)

Repeat Timer/Auto Repeat Timer switching, Alert on/off

E-38

Troubleshooting

Time Setting

■ The current time setting is off by hours.

Your Home City setting may be wrong (page E-12). Check your Home City setting

and correct it, if necessary.

■ The current time setting is off by one hour.

You may need to change your Home City’s standard time/daylight saving time

(DST) setting. Use the procedure under “Adjusting the Digital Time and Date

Settings” (page E-15) to change the standard time/daylight saving time (DST)

setting.

World Time Mode

■ The time for my World Time City is off in the World Time Mode.

This could be due to incorrect switching between standard time and daylight saving

time. See “To specify standard time or daylight saving time (DST) for a city” (page

E-20) for more information.

E-37

To change the illumination duration

1. In the Timekeeping Mode, hold down A until the seconds start to flash. This is

the setting mode.

2. Press C nine times so the illumination duration setting mode is on the display.

3. Press D to toggle the illumination duration between 1.5seconds (

) and

3seconds (

).

4. After the settings are the way you want, press A to exit the setting mode.

Illumination Precautions

x Illumination may be hard to see when viewed under direct sunlight.

x Illumination turns off automatically whenever an alarm sounds.

x Frequent use of illumination runs down the battery.

E-36

Illumination

The face of the watch is illuminated for easy reading in

the dark.

To turn on illumination

In any mode (except when a setting mode, with flashing

digits is on the display), press B to illuminate the

display.

x You can use the procedure below to select either

1.5seconds or 3 seconds as the illumination duration.

When you press B, the display will remain illuminated

for about 1.5seconds or 3seconds, depending on the

current illumination duration setting.

E-35

x If you need to advance the analog time setting a long way, hold down D until

the time starts advancing at high speed, and then press B. This locks the high-

speed hand movement, so you can release the two buttons. High-speed hand

movement continues until you press any button. It will also stop automatically

after the time advances 12hours or if an alarm (daily alarm, Hourly Time Signal,

or countdown beeper) starts to sound.

4. Press A to exit the setting mode.

x The watch will automatically adjust the minute hand slightly to match its internal

second count when you exit the setting mode.

x To return to the Timekeeping Mode, press C.

E-34

Adjusting the Analog Hand Setting

Use the following procedure to adjust the analog hands so their settings match the

digital time.

To adjust the analog time

1. Use C to select the Hand Setting Mode as shown on

page E-9.

2. Hold down A until the current digital time starts to

flash, which indicates the analog setting mode.

3. Press D to advance the analog time setting by

20seconds.

x Holding down D advances the analog time setting

at high speed.

E-33

To stop the alarm

Press any button.

NOTE

x In the case of the snooze alarm, the alert operation is performed a total of seven

times, every five minutes, until you turn the alarm off.

x Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

− Disabling snooze

− Displaying the snooze alarm setting screen

− Displaying the Timekeeping Mode setting screen

− Changing the summer time setting of the Home City in the World Time Mode

E-32

5. Press A to exit the setting mode.

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn an alarm and the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select an alarm or the

Hourly Time Signal.

2. When the alarm or the Hourly Time Signal you want is

selected, press A to toggle it between on and off.

x The alarm on indicator (when any alarm is on), snooze

alarm indicator (when the snooze alarm is on), and the

Hourly Time Signal on indicator (when the Hourly Time

Signal is on) are shown on the display in all modes.

Snooze alarm on indicator

Hourly time signal

on indicator

E-31

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

AL1 AL3 SNZAL2 AL4 SIG

DDDDD

D

2. Hold down A for at least two seconds until the alarm time starts to flash. This is

the setting mode.

3. Press C to move the flashing between the hour and minute settings.

4. While a setting is flashing, use D (+) and B (–) to change it.

x When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (no indicator) or p.m. (P indicator).

Alarm on indicator

E-30

Using the Alarm

When an alarm is turned on, the alarm tone will sound

when its alarm time is reached. One of the alarms is a

snooze alarm, while the other four are daily alarms. The

snooze alarm operation will repeat every five minutes,

up to seven times. You also can turn on an Hourly

Time Signal that causes the watch to beep twice every

hour on the hour.

To enter the Alarm Mode

Use C to select the Alarm Mode as shown on page

E-9.

x The snooze alarm screen is indicated by SNZ, while

the other alarm screens are numbered AL1 through

AL4. The Hourly Time Signal screen is indicated by

SIG.

Alarm number

Alarm time (Hour : Minutes)

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Casio Baby-G BGA-260-7AER Armbandsur. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Casio. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Casio Baby-G BGA-260-7AER Armbandsur på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Casio Armbandsur
Fler bruksanvisningar för Armbandsur

Vanliga frågor om Casio Baby-G BGA-260-7AER Armbandsur

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Casio G-Shock DWE-5600CC-3ER Armbandsur

Bruksanvisning

Casio G-Shock GA-2100OCT-1A1ER Armbandsur

Bruksanvisning

Casio Edifice EFS-S570DB-2AUEF Armbandsur

Bruksanvisning

Casio G-Shock DWE-5600KS-7ER Armbandsur

Bruksanvisning

Casio G-Shock GM-110NE-1AER Armbandsur

Bruksanvisning

Casio Pro Trek PRG-240-3ER Armbandsur

Bruksanvisning

Casio Edifice EFR-S572DC-1AVUEF Armbandsur

Bruksanvisning

Casio G-Shock GM-5600SCM-1ER Armbandsur

Relaterade kategorier