Bruksanvisning Black and Decker IR0110W Strykjärn

Bruksanvisning

Please Read and Save this Use and Care Book.

IMPORTANT SAFETY

INSTRUCTIONS

When using your iron, basic safety precautions should

always be followed, including the following:

❍ READ ALL INSTRUCTIONS BEFORE USING.

❍ Use iron only for its intended use.

❍ To protect against a risk of electric shock, do not immerse

the iron in water or other liquids.

❍ The iron should always be turned to the minimum (min)

setting before plugging or unplugging from outlet. Never

yank cord to disconnect from the outlet; instead grasp

plug and pull to disconnect.

❍ Do not allow cord to touch hot surfaces. Let iron cool

completely before putting away. Loop cord loosely around

iron when storing.

❍ Always disconnect iron from electrical outlet when filling

with water or emptying, and when not in use.

❍ Do not operate iron with a damaged cord, or if the iron

has been dropped or damaged. To avoid the risk of

electric shock, do not disassemble the iron; take it to a

qualified service person for examination and repair, or

call the appropriate toll-free number on the cover of this

manual. Incorrect reassembly can cause a risk of electric

shock when the iron is used.

❍ Close supervision is necessary for any appliance being

used by or near children. Do not leave iron unattended

while connected or on an ironing board.

❍ Burns can occur from touching hot metal parts, hot water

or steam. Use caution when you turn a steam iron upside

down or use the surge of steam—there may be hot water

in the reservoir. Avoid rapid movement of iron to minimize

hot water spillage.

❍

The iron must be used and rested on a stable surface.

- When placing the iron on its stand, ensure that the

surface on which the stand is placed is stable.

- The iron is not to be used if it has been dropped,

if there are visible signs of damage or if it is

leaking.

SPECIAL INSTRUCTIONS

❍ To avoid a circuit overload, do not operate another high-

wattage appliance on the same circuit.

❍ If an extension cord is absolutely necessary, a cord rate

at 15-ampere cord should be used. Cords rated for less

amperage may overheat. Care should be taken to arrange

the cord so that it cannot be pulled or tripped over.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other).

To reduce the risk of electric shock, this plug is intended to fit into a

polarized outlet only one way. If the plug does not fit fully into the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician.

Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw

to prevent removal of the outer cover. To reduce the risk of fire or

electric shock, do not attempt to remove the outer cover. There are

no user-serviceable parts inside. Repair should be done only by

authorized service personnel.

Note: If the power supply cord is damaged, it should be replaced

by qualified personnel or in Latin America by an authorized service

center.

How to Use

This product is for household use only.

GETTING STARTED

• Remove any labels, stickers or tags attached to the body or

soleplate of the iron.

Note: Use ordinary tap water for ironing. Do not use water processed

through a home softening system.

Important: For optimum performance, let the iron stand for

90 seconds before beginning to iron.

Tip: If unsure of a garment’s fiber, test a small area (on an inside

seam or hem) before ironing.

FILLING WATER TANK

1. Tilt the iron and using a clean measuring cup, pour water into

opening until the water reaches the MAX level mark on the water

tank. Do not overfill.

2. Plug iron into electrical outlet.

SPECIAL FEATURES

Automatic Shutoff in 3 Positions

• Your iron will automatically turn off after 30 seconds of inactivity

if left on its soleplate or on its side. If left vertically on its heel rest,

it will turn off after 8 minutes.

• Once you pick up the iron, the light will turn solid green again once

the set temperature is reached. If the iron is not fully heated, a solid

red light will appear; once the iron is ready, the light will turn solid

green.

Note: Wait for iron to reheat completely before resuming operation.

IRONING WITH STEAM

Steam is produced when you turn the fabric select dial between

settings ●● and ●●●.

1. Plug the iron into electrical outlet.

2. Be sure there is water in the water tank.

3. Turn the fabric select dial to appropriate setting for your fabric

(between ●● and ●●●). Read garment’s label to help you

determine fabric type.

4. Set the steam/dry selector to desired steam setting.

5. When finished ironing, turn the steam/dry selector to and

unplug the iron.

Important: Always stand the iron on its heel rest when powered on

or not in use.

SPRAY

1. Be sure the iron is filled with water.

2. On first use, pump the spray button several times.

DRY IRONING

1. Turn the steam/dry selector to .

2. Turn the fabric select dial to appropriate setting for your fabric.

3. Power indicator light comes on.

4. When finished ironing, make sure to unplug the iron.

Important: Always stand the iron on its heel rest when powered on

or not in use.

Care and Cleaning

This product contains no user serviceable parts. Refer service to

qualified service personnel.

CLEANING

1. Make sure iron is unplugged and has cooled completely. Wipe the

soleplate and outer surfaces with a soft cloth dampened with water

and mild household detergent. Never use abrasives, heavy-duty

cleansers, vinegar or scouring pads that may scratch or discolor

the iron.

2. After cleaning, steam iron over an old cloth to remove any residue

from the steam vents.

STORING YOUR IRON

1. Unplug the iron and let it cool completely.

2. Check that the fabric select dial is set to .

3. Store iron on its heel rest.

NEED HELP?

For service, repair or any questions regarding your appliance, call

the appropriate 800 number on cover of this book. Please DO NOT

return the product to the place of purchase. Also, please DO NOT mail

product back to manufacturer, nor bring it to a service center. You may

also want to consult the website listed on the cover of this manual.

TWO-YEAR LIMITED WARRANTY

(Applies only in the United States and Canada)

What does it cover?

• Any defect in material or workmanship provided; however,

Applica’s liability will not exceed the purchase price of product.

For how long?

• Two years from the date of original purchase with proof of such

purchase.

What will we do to help you?

• Provide you with a reasonably similar replacement product that is

either new or factory refurbished.

How do you get service?

• Save your receipt as proof of date of sale.

• Visit the online service website at www.prodprotect.com/applica, or

call toll-free 1-800-231-9786, for general warranty service.

• If you need parts or accessories, please call 1-800-738-0245.

What does your warranty not cover?

• Damage from commercial use

• Damage from misuse, abuse or neglect

• Products that have been modified in any way

• Products used or serviced outside the country of purchase

• Glass parts and other accessory items that are packed with the

unit

• Shipping and handling costs associated with the replacement of

the unit

• Consequential or incidental damages (Please note, however,

that some states do not allow the exclusion or limitation of

consequential or incidental damages, so this limitation may not

apply to you.)

How does state law relate to this warranty?

• This warranty gives you specific legal rights. You may also have

other rights that vary from state to state or province to province.

© 2011 Applica Consumer Products, Inc.

2011/5-11-50E/S

When using your iron for the first time, you may notice water

residue inside the unit. This is normal.

is a registered trademark of The Black & Decker

Corporation, Towson, Maryland, USA

Made and Printed in People’s Republic of China

Product may vary slightly from what is illustrated.

LIGHT ‘N EASY

®

AUTOMATIC SHUTOFF IRON

USA/Canada 1-800-231-9786

Accessories/Parts 1-800-738-0245

Register your product at www.prodprotect.com/applica

MODEL ❍ IR0110W

1. Spray nozzle

2. Water-fill opening

3. Steam/Dry selector

4. Spray button

5. Power indicator light

6. 360° pivoting cord

7. Heel rest

8. Fabric-select dial

9. Water tank

10. Soleplate





















Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Black and Decker IR0110W Strykjärn. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Black and Decker. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Black and Decker IR0110W Strykjärn på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Black and Decker Strykjärn
Fler bruksanvisningar för Strykjärn

Vanliga frågor om Black and Decker IR0110W Strykjärn

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Black and Decker F950 Strykjärn

Bruksanvisning

Black and Decker IR2110 Strykjärn

Bruksanvisning

Black and Decker ICR100 Strykjärn

Bruksanvisning

Black and Decker F63D Strykjärn

Bruksanvisning

Black and Decker IR4500SC Strykjärn

Bruksanvisning

Black and Decker F505 Strykjärn

Bruksanvisning

Black and Decker ICR515 Strykjärn

Bruksanvisning

Black and Decker ICR505 Strykjärn

Relaterade kategorier