Bruksanvisning Bauknecht HIR4 EI8VS3 PT Ugn

Bruksanvisning

6

4. FAST PREHEATING

Turn the selection knob to the symbol to select the

fast preheating function and confirm by pressing the

selection/confirmation button: the settings are shown

on the display.

If the proposed temperature is that desired, press

the selection/confirmation button. To change the

temperature, proceed as described in previous

paragraphs.

PRE

Once this phase has finished, an audible signal will

sound and the display will indicate that the oven has

reached the set temperature.

At this point, open the door, place the food in the

oven, close the door and start cooking.

At the end of preheating, the oven automatically

selects the conventional function: If you wish to set a

different cooking function, turn the selection knob and

select the desired function.

Please note: Placing the food in the oven before preheating

has nished may have an adverse eect on the nal cooking

result. Opening the door during the preheating phase will

stop pause it.

The cooking time does not include a preheating phase.

You can always change the temperature you want the oven

to reach using the adjustment knob.

5. END OF COOKING

An audible signal will sound and the display will

indicate that cooking is complete.

Press the selection/confirmation button to continue

cooking in manual mode (without a programmed

cooking time) or turn the adjustment knob to extend

the cooking time by setting a new duration.

In both cases, the temperature or the grill level

settings will be retained.

BROWNING

Some functions of the oven enable you to brown

the surface of the food by activating the grill once

cooking is complete.

PRESS

When the display shows the relevant message, if

required press the selection/confirmation button to

start a five-minute browning cycle.

You can stop the function at any time by turning the

selection knob to

to switch the oven o.

. TIMER

When the oven is switched off, the display can be

used as a timer. To activate this function, make sure

that the oven is switched off and turn the adjustment

knob: The

icon will flash on the display.

Turn the adjustment knob to set the length of time

you require and then press the selection/confirmation

button to activate the timer. An audible signal will

sound and the display will indicate once the timer has

finished counting down the selected time.

Please note: The timer does not activate any of the cooking

cycles. Use the adjustment knob to change the time set on

the timer; turn the selection knob to to switch the timer

o at any time.

. COOKTOP OPERATION

(see the instructions supplied with the cooktop).

The oven control panel features 4 adjustable knobs

for cooktop operation.

The cooktop control knobs are marked with a

numerical scale corresponding to different power

settings.

Please note: The - symbol on the cooktop control knobs

indicates that there are no corresponding functions, and

therefore, in that position, the cooking zone switches o.

Turn the control knob of the relevant hotplate

clockwise to the desired power setting.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Bauknecht HIR4 EI8VS3 PT Ugn. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Bauknecht. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Bauknecht HIR4 EI8VS3 PT Ugn på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Bauknecht Ugnar
Fler bruksanvisningar för Ugnar

Vanliga frågor om Bauknecht HIR4 EI8VS3 PT Ugn

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Bauknecht ESN 5860 WS Ugn

Bruksanvisning

Bauknecht BMVD 8200/IN Ugn

Bruksanvisning

Bauknecht BSZ 4007 IN Ugn

Bruksanvisning

Bauknecht EMC 7253 IN Ugn

Bruksanvisning

Bauknecht ESZ 5860 SW Ugn

Bruksanvisning

Bauknecht HIS3 EP8V2 IN Ugn

Bruksanvisning

Bauknecht EGZH 4400 IN Ugn

Bruksanvisning

Bauknecht BSZ 3000/01 IN Ugn

Relaterade kategorier