Bruksanvisning Whirlpool GMW 6422/IXL EE Häll

Bruksanvisning

of problems, contact the dealer or your nearest After-

sales Service. Once installed, packaging waste (plastic,

styrofoam parts etc.) must be stored out of reach of

children - risk of suocation. The appliance must be

disconnected from the power supply before any

installation operation - risk of electrical shock. During

installation, make sure the appliance does not damage

the power cable - risk of re or electrical shock. Only

activate the appliance when the installation has been

completed.

The electrical and gas connections must comply

with local regulation.

WARNING : Modication of the appliance and its

method of installation are essential in order to use

the appliance safely and correctly in all the additional

countries.

Use pressure regulators suitable for the gas

pressure indicated in the instruction.

The room must be equipped with an air extraction

system that expels any combustion fumes. This may

consist of a hood or an electric fan that automatically

starts each time the appliance is switched on.

The room must also allow proper air circulation,

as air is needed for combustion to occur normally.

The ow of air must not be less than 2 m3/h per kW

of installed power.

The air circulation system may take air directly

from the outside by means of a pipe with an inner

cross section of at least 100 cm2; the opening must

not be vulnerable to any type of blockages.

The system can also provide the air needed for

combustion indirectly, i.e. from adjacent rooms tted

with air circulation tubes as described above. However,

these rooms must not be communal rooms, bedrooms

or rooms that may present a re hazard.

Liquid petroleum gas sinks to the oor as it is

heavier than air. Therefore, rooms containing LPG

cylinders must also be equipped with vents to

allow gas to escape in the event of a leak. As a result

LPG cylinders, whether partially or completely full,

must not be installed or stored in rooms or storage

areas that are below ground level (cellars, etc.). It is

advisable to keep only the cylinder being used in

the room, positioned so that it is not subject to

heat produced by external sources (ovens,

replaces, stoves, etc. ) which could raise the

temperature of the cylinder above 50°C.

Carry out all cabinet cutting works before tting

the appliance in the furniture and remove all wood

chips and sawdust.

If the appliance is Not installed above an oven, a

separator panel (not included) must be installed in

the compartment under the appliance.

Should you experience diculty in turning the burners knobs, please

contact After Sales Service for replacement of the burner tap if found to

be faulty.

The openings used for the ventilation and dispersion of heat must never

be covered.

GAS CONNECTION

WARNING : Prior to installation, ensure that the

local distribution conditions (nature of gas and gas

pressure) and the adjustment of the appliance are

compatible.

Check that the pressure of the gas supply is

consistent with the values indicated in Table 1

(“Burner and nozzle specications”).

WARNING : The adjustment condictions for this

appliance are stated on the lable (or data plate).

WARNING : This appliance is not connected to a

combustion products evacuation device. It shall be

installed and connected in accordance with current

installation regulations. Particulat attention shall be

given to the relevant requirements regarding

ventilation.

If the appliances is connected to liquid gas, the

regulation screw must be fastned as tightly as

possible.

IMPORTANT : When gas cylinder is adopted, the

gas cylinder or gas container must be properly

settled (vertical orientation).

WARNING : This operation must be perfomed by

a qualied technician

Use only exible or rigid metal hose for gas connection.

Connection with a rigid pipe (copper or steel)

Connection to the gas system must be carried out in

such a way as not to place any strain of any kind on

the appliance.There is an adjustable L-shaped pipe

tting on the appliance supply ramp and this is

tted with a seal in order to prevent leaks. The seal

must always be replaced after rotating the pipe

tting (the seal is provided with the appliance). The

gas supply pipe tting is a threaded 1/2 gas

cylindrical male attachment.

Connecting a exible jointless stainless steel pipe

to a threaded attachment The gas supply pipe tting

is a threaded 1/2 gas cylindrical male attachment.

These pipes must be installed so that they are never

longer than 2000 mm when fully extended. Once

connection has been carried out, make sure that the

exible metal pipe does not touch any moving parts

and is not compressed. Only use pipes and seals that

comply with current National regulations.

IMPORTANT : If a staineless steel hose is used, it

must be installed so as not touch any mobile part of

the furniture (e.g.drawer). It must pass thorugh an

area where there are no obstructions and where it is

possible to inspect it on all its length.

The appliance should be connected to the main

gas supply or to gas cylinder in compliance with the

current National regulations. Before carry out the

connection, make sure that the appliance is

compatible with the gas supply you wish to use. If

this is not the case, follow the instructions indicated

in the paragraph “Adapting to dierent types of gas”.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Whirlpool GMW 6422/IXL EE Häll. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Whirlpool. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Whirlpool GMW 6422/IXL EE Häll på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Whirlpool Hällar
Fler bruksanvisningar för Hällar

Vanliga frågor om Whirlpool GMW 6422/IXL EE Häll

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Whirlpool W5CE1522FB Häll

Bruksanvisning

Whirlpool RC8600XBB6 Häll

Bruksanvisning

Whirlpool RC8640XBB2 Häll

Bruksanvisning

Whirlpool G7CE3635 Häll

Bruksanvisning

Whirlpool WCE55US0HB Häll

Bruksanvisning

Whirlpool RC8436XTW1 Häll

Bruksanvisning

Whirlpool GOWL 758/NB Häll

Bruksanvisning

Whirlpool WCIT7536SB Häll

Relaterade kategorier