Bruksanvisning Hikoki G 23MRUA Vinkelslip

Bruksanvisning

5

English

7. The wheel continues to rotate after the tool is switched

off .

After switching off the machine, do not put it down until

the depressed center wheel has come to a complete

stop. Apart from avoiding serious accidents, this

precaution will reduce the amount of dust and swarf

sucked into the machine.

8. When the machine is not use, the power source should

be disconnected.

9. Be sure to switch OFF and disconnect the attachment

plug from the receptacle to avoid a serious accident

before the depressed center wheel is assembling and

disassembling.

10. RCD

The use of a residual current device with a rated residual

current of 30 mA or less at all times is recommended.

11. Do not operate from a direct current power source,

booster or any other type of transformer. Doing so may

not only cause damage to the grinder, but may lead to

accidents.

12. Some mobile generators may not be usable with the

machine.

SYMBOLS

WARNING

The following show symbols used for the machine.

Be sure that you understand their meaning before

use.

G23MRUA : Disc Grinder

To reduce the risk of injury, user must read

instruction manual.

Always wear eye protection.

Only for EU countries

Do not dispose of electric tools together with

household waste material!

In observance of European Directive 2002/96/

EC on waste electrical and electronic equipment

and its implementation in accordance with

national law, electric tools that have reached

the end of their life must be collected separately

and returned to an environmentally compatible

recycling facility.

V Rated voltage

Alternating current

P

Power input

n

Rated speed

min

-1

Revolution or reciprocations per minute

Switching ON

Switching OFF

Lock

Switch locks to the “ON” position.

Usual carbon brush

Auto-stop carbon brush

Disconnect mains plug from electrical outlet

Warning

Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package

contains the accessories listed in the below.

○ Wrench .........................................................................1

○ Side handle ...................................................................1

○ Hex. bar wrench ............................................................1

Depressed center wheels are not provided as standard

accessories.

Standard accessories are subject to change without notice.

APPLICATIONS

○ Removal of casting fi n and fi nishing of various types of

steel, bronze and aluminum materials and castings.

○ Grinding of welded sections or sections cut by means of

a cutting torch.

○ Grinding of synthetic resins, slate, brick, marble, etc.

○ Cutting of synthetic concrete, stone, brick, marble, and

similar materials.

SPECIFICATIONS

Model G23MRUA

Voltage (by areas)*

1

(230, 240 V)

Power Input*

1

2500 W

Rated speed 6600 min

-1

Wheel

Outer dia. 230 mm

Hole Dia. 22.23 mm

Thickness 6 mm

Peripheral speed 80 m/s

Weight*

2

6.8 kg

*1 Be sure to check the nameplate on product as it is

subject to change by areas.

*2 Weight: According to EPTA-Procedure 01/2003

○ Soft-start

○ 0 Voltage Re-start Protection

The 0 voltage restart protection feature prevents the

power tool from restarting after the power has been

temporarily cut off during operation.

NOTE

Due to HiKOKI’s continuing program of research and

development, the specifi cations herein are subject to

change without prior notice.

MOUNTING AND OPERATION

Action Figure Page

Fitting and adjusting the wheel guard 1 144

Fixing the side handle 2 144

Assembling depressed center wheel 3 144

Assembling cutting wheel 4 144

Assembling diamond wheel 5 145

0000Book̲G23MRUA.indb50000Book̲G23MRUA.indb5 2017/12/0512:11:242017/12/0512:11:24

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Hikoki G 23MRUA Vinkelslip. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Hikoki. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Hikoki G 23MRUA Vinkelslip på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Hikoki Vinkelslipar
Fler bruksanvisningar för Vinkelslipar

Vanliga frågor om Hikoki G 23MRUA Vinkelslip

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Hikoki G 18UDY Vinkelslip

Bruksanvisning

Hikoki G 13BY Vinkelslip

Bruksanvisning

Hikoki G 18DSL2 Vinkelslip

Bruksanvisning

Hikoki G 23SU Vinkelslip

Bruksanvisning

Hikoki G 3613DA Vinkelslip

Bruksanvisning

Hikoki G 10SQ Vinkelslip

Bruksanvisning

Hikoki G 10SN Vinkelslip

Bruksanvisning

Hikoki G 23BYE Vinkelslip

Relaterade kategorier