Bruksanvisning Black and Decker HT20 Häcksax

Behöver du en bruksanvisning för din Black and Decker HT20 Häcksax? Nedan kan du se och ladda ner PDF-bruksanvisningen gratis på svenska. Den här produkten har för närvarande 4 vanliga frågor, 0 kommentarer och har 0 röster. Om det här inte är bruksanvisningen du vill ha, vänligen kontakta oss.

Är produkten defekt och erbjuder bruksanvisningen ingen lösning? Gå till ett Repair Café för gratis reparationstjänster.

Bruksanvisning

Loading…

g) A GFCI with a tripping current of 30mA or less is recommended.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operating
power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying power
tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep
your hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught in moving
parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
44))
Power tool use and care
a) Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.
3
c) Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition
that may affect the power toolʼs operation. If damaged,
have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those intended could
result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
HEDGE TRIMMER SAFETY WARNINGS
Use both hands when operating the hedge trimmer. Using one
hand could cause loss of control and result in serious
personal injury.
Keep all parts of the body away from the cutter blade. Do not
remove cut material or hold material to be cut when blades are
moving. Make sure the switch is off when clearing jammed
material. Blades coast after turn off. A moment of inattention
while operating the hedge trimmer may result in serious personal
injury.
Ladda ner bruksanvisning i Engelska (PDF, 2.78 MB)
(Tänk på miljön och skriv endast ut denna bruksanvisning om det verkligen är nödvändigt)

Loading…

Betyg

Berätta vad du tycker om Black and Decker HT20 Häcksax genom att betygsätta den. Vill du dela med dig av dina åsikter om denna produkt eller ställa en fråga? Lämna en kommentar nederst på sidan.
Är du nöjd med Black and Decker HT20 Häcksax?
Ja Nej
Bli den första personen som betygsätter denna produkt
0 röster

Delta i konversationen om denna produkt

Här kan du dela vad du tycker om Black and Decker HT20 Häcksax. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Black and Decker HT20 Häcksax. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Black and Decker. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Black and Decker HT20 Häcksax på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Märke Black and Decker
Modell HT20
Kategori Häcksaxar
Filtyp PDF
Filstorlek 2.78 MB

Alla bruksanvisningar för Black and Decker Häcksaxar
Fler bruksanvisningar för Häcksaxar

Vanliga frågor om Black and Decker HT20 Häcksax

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Hur vet jag att min häcksax är trubbig? Verifierad

När grenar dras i stället för att klippas är häcksaxen trubbig och måste slipas.

Detta hjälpte (342) Läs mer

Hur slipar jag mina häcksaxar? Verifierad

Att slipa dina häcksaxar är viktigt för att bibehålla verktygets prestanda och effektivitet. För att slipa bladen behöver du en fil eller slipsten som är speciellt utformad för den typ av blad som finns på din häcksax.

Detta hjälpte (292) Läs mer

Hur smörjer jag mina häcksaxarblad? Verifierad

Smörjning av dina häcksaxar hjälper till att minska friktion och slitage, vilket förlänger verktygets livslängd. Använd en högkvalitativ smörjolja speciellt utformad för häckklippare och applicera en liten mängd på knivarna efter varje användning.

Detta hjälpte (142) Läs mer

Hur kan jag förhindra att det bildas rost på mina häcksaxar? Verifierad

Rost kan orsaka skador på dina häcksaxar, vilket minskar deras prestanda och livslängd. För att förhindra rost, rengör och torka bladen noggrant efter varje användning och förvara dem på en torr, ren plats. Du kan också överväga att applicera en skyddande beläggning, som olja eller en rostinhibitor, på bladen innan du lagrar dem.

Detta hjälpte (85) Läs mer
Bruksanvisning Black and Decker HT20 Häcksax

Relaterade produkter

Relaterade kategorier

×
Download